Laurence 1 Posted January 4, 2015 Hello everyone I bought this xbox hacked I want everything updated on it as in the dashboard version, kernel and everything But I don't want to attempt anything because I don't want to break it thanks everyone 1 Quote Share this post Link to post Share on other sites
Anonymous 95 Posted January 4, 2015 finally what you are trying to say?????? RGH updating is not a rocket science u jus need some good guidance and better understanding sense tatz it, follow this tut http://forum.homebrew-connection.org/index.php?topic=144.0 1 Quote Share this post Link to post Share on other sites
Laurence 1 Posted January 4, 2015 This is the version of my dashboard and nothing works on it Dash version: 2.2 Rev725 Kernel version 2.0.15574.0 Dashboard 2.015574.0 I'd like to update them all so the hacked dashboard works properly because it's bugging me! Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 4, 2015 Start with the kernel as described in the tutorial Anonymous linked you to, then you replace the F3 files with the latest ones using a filemanager (you can't do this while FSD is running, so you need XEXMenu or something similar) 1 Quote Share this post Link to post Share on other sites
Laurence 1 Posted January 4, 2015 So If I follow guide he linked me too that will update my kernel? I've got xexmenu also what are f3 files Sorry about this I just don't want to break my xbox Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 4, 2015 Start by following the guide, it explains how to update your kernel... Once you've updated your kernel you'll want to download the latest FSD data from here: http://www.realmodscene.com/index.php?/topic/2090-f3-rev-775/ then you need to find where FSD is installed, easiest way is to check launch.ini, commonly found @ hdd1:\ or flash:\ To access the XEXMenu filemanager you press RB once, then you use X and Y to open the menus Quote Share this post Link to post Share on other sites
Laurence 1 Posted January 4, 2015 The flash 360 thing crashes when I try and open it with xexmenu Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted January 4, 2015 Install the latest dashlaunch installer, and use j-runner to use the xebuild update feature. It is as simple as enableing 1 setting in dashlaunch, and clicking 1 button in j-runner, and it will update your kernel, and your avatar/kinect data all in one button click. Very nice feature. As for FSD, there are two options: 1. Download the latest version, and copy it over the old version, 2. scrap fsd, which is kinda slow, and buggy, and switch to aurora, which is still being developed, and getting updates, has a built in trainer manager/engine, and a bunch of other nice redesigns. It also allows Link capabilitys like FSD, so there is no reason not to switch. If you use connectX to mount a samba share to play your games, aurora doesnt support that yet, but probably will in the next version or 2. Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 4, 2015 The flash 360 thing crashes when I try and open it with xexmenu Use Simple 360 NAND Flasher... it's way better then Flash360 Quote Share this post Link to post Share on other sites
Laurence 1 Posted January 4, 2015 I tried to use simple 360 Nandos flasher and it keeps crashing Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 4, 2015 I tried to use simple 360 Nandos flasher and it keeps crashing What is it saying? and where are you running it from? also, which version are you using? Quote Share this post Link to post Share on other sites
Laurence 1 Posted January 4, 2015 Version 1.2 It's on the harddrive On the main bit where all the other folders are It just says can't play try redownloading Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 4, 2015 Version 1.2 It's on the harddrive On the main bit where all the other folders are It just says can't play try redownloading Ok, what that means is that the xex got corrupted during the transfer, are you using FTP? if so; make sure you use binary and not ASCII for the transfer mode... Quote Share this post Link to post Share on other sites
Laurence 1 Posted January 5, 2015 I used modio to transfer it because I've lost my wifi adapter for the Xbox and my friend said he will try to find his for me! I'll try the step above also I really appreciate this! Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 5, 2015 I used modio to transfer it because I've lost my wifi adapter for the Xbox and my friend said he will try to find his for me! I'll try the step above also I really appreciate this! Maybe modio messed up something with the xex? basically, the xex runs from any directory without any other files around it... 1 Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted January 5, 2015 When I use simple 360 nand flasher, I always just put it on the root of a usb drive, and then boot the xbox, and set my default path in a different launch ini on the flashdrive. the xbox checks usb for launch.ini before it checks the hdd. Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 5, 2015 When I use simple 360 nand flasher, I always just put it on the root of a usb drive, and then boot the xbox, and set my default path in a different launch ini on the flashdrive. the xbox checks usb for launch.ini before it checks the hdd. to clarify the above, he doesn't put "default.xex" in the root of the usb, he puts the folder there... the next update will however support putting the default.xex alone on the root of the usb (already fixed that locally, just haven't finished everything else as i'm working on other projects at the same time) 1 Quote Share this post Link to post Share on other sites
Laurence 1 Posted January 14, 2015 Just received the wireless adapter I bought I'll be having a go tonight to do the xbox Quote Share this post Link to post Share on other sites
Laurence 1 Posted January 14, 2015 I've updated it Dash version 2.2 Rev725 Kernel version 2.0.17150.0 Dashboard 2.0.17150.0 And now dahs launch isn't loading Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 14, 2015 I've updated it Dash version 2.2 Rev725 Kernel version 2.0.17150.0 Dashboard 2.0.17150.0 And now dahs launch isn't loading Did you install 3.14? Quote Share this post Link to post Share on other sites
Laurence 1 Posted January 14, 2015 I don't know also I can't get on to my fed dashboard Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 14, 2015 I don't know also I can't get on to my fed dashboard Download dashlaunch 3.14 and put the installer in the root of your USB... like so; x:\default.xex now boot with this usb in your console and it should ask you to install it... Quote Share this post Link to post Share on other sites
Laurence 1 Posted January 14, 2015 On thwart last bit off the guide I can't get it to update I put the files on the root of the usb and it doesn't work I've tried it with $ or with two of $ these Also when I out the usb back in to the computer The files are gone and there is a log that just say Now update = false? Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 14, 2015 That's strange... the Xbox 360 NEVER deletes the update... that log, what name does it have? and what does it say EXACTLY? Quote Share this post Link to post Share on other sites
Laurence 1 Posted January 14, 2015 Fsd is loading now! The log Is called launch [settings] Noupdater = false That's it Quote Share this post Link to post Share on other sites