burak 1 Posted December 17, 2014 I don't know why but connecting, switching between folders and exploring FTP is very very slow. I don't remember when that happened but earlier everything was ok. I have checked my friends console and it's working very fast. I must wait like 20 seconds just to connect to FTP. Another 5-15 seconds while switching folders and starting any transfer. I've tried two different FTP clients: Total Commander and Filezilla. In both the speed is very poor. Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted December 17, 2014 Did you test this with your computer on your friends console? if so; it's something with your console causing the problem... otherwise it's likely something on your computer causing it... Quote Share this post Link to post Share on other sites
burak 1 Posted December 17, 2014 Different computer, unfortunately. I'm using a lot of different FTP sites on my computer and don't have any problems with connecting or transferring files. Connecting locally to my Synology NAS takes a second or two. It's just my xbox that is very slow. Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted December 17, 2014 Different computer, unfortunately. I'm using a lot of different FTP sites on my computer and don't have any problems with connecting or transferring files. Connecting locally to my Synology NAS takes a second or two. It's just my xbox that is very slow. Are you using ethernet or wifi? (on both box and computer) Quote Share this post Link to post Share on other sites
Dr.Gonzo 392 Posted December 17, 2014 You have take a look inside your FTP Client log ? Perhaps there are any transmission errors listed. Quote Share this post Link to post Share on other sites
burak 1 Posted December 17, 2014 Are you using ethernet or wifi? (on both box and computer) ETH on my xbox and WiFi on my laptop. My synology is also over ETH. You have take a look inside your FTP Client log ? Perhaps there are any transmission errors listed. There's no errors. Because it finally connects and I can look around. It just takes a lot of time. I haven't got any time outs or similar errors. I will try and make a log in Filezilla tomorrow with timestamps. Quote Share this post Link to post Share on other sites
Dr.Gonzo 392 Posted December 17, 2014 The FTP Client log can you show other important thinks like, in which mode (passive/active) your transmission is running, limitations, and so on. Quote Share this post Link to post Share on other sites
burak 1 Posted December 18, 2014 07:34:51 Status: ÅÄ…czenie z 192.168.1.200:21...07:35:00 Status: PoÅ‚Ä…czenie nawiÄ…zanie, oczekiwanie na wiadomość powitalnÄ…...07:35:00 Odpowiedź 220 FtpDll Ready07:35:00 Polecenie: USER xboxftp07:35:00 Odpowiedź 331 User xboxftp OK, need password07:35:00 Polecenie: PASS *******07:35:00 Odpowiedź 230 User logged in07:35:00 Polecenie: SYST07:35:00 Odpowiedź 215 UNIX Type: L807:35:00 Polecenie: FEAT07:35:01 Odpowiedź 211-Extensions supported:07:35:01 Odpowiedź CDUP07:35:01 Odpowiedź UTF807:35:01 Odpowiedź 211 END07:35:01 Polecenie: OPTS UTF8 ON07:35:01 Odpowiedź 502 Command not found07:35:01 Status: PoÅ‚Ä…czono07:35:01 Status: Uzyskiwanie listy katalogów...07:35:01 Polecenie: PWD07:35:01 Odpowiedź 257 "/"07:35:01 Polecenie: TYPE I07:35:01 Odpowiedź 200 Type set to I07:35:01 Polecenie: PASV07:35:01 Odpowiedź 227 Entering Passive Mode (192,168,1,200,195,80)07:35:01 Polecenie: LIST07:35:01 Odpowiedź 150 Opening connection07:35:09 Odpowiedź 226 Transfer complete07:35:10 Polecenie: PASV07:35:10 Odpowiedź 227 Entering Passive Mode (192,168,1,200,195,80)07:35:10 Polecenie: LIST -a07:35:10 Odpowiedź 150 Opening connection07:35:18 Odpowiedź 226 Transfer complete07:35:19 Status: Listowanie katalogów zakoÅ„czone pomyÅ›lnie07:35:22 Status: Uzyskiwanie listy katalogów...07:35:22 Polecenie: CWD Hdd107:35:22 Odpowiedź 250 Current directory is /Hdd1/07:35:22 Polecenie: PWD07:35:22 Odpowiedź 257 "/Hdd1/"07:35:22 Polecenie: PASV07:35:22 Odpowiedź 227 Entering Passive Mode (192,168,1,200,195,80)07:35:22 Polecenie: LIST -a07:35:22 Odpowiedź 150 Opening connection07:35:31 Odpowiedź 226 Transfer complete07:35:31 Status: Listowanie katalogów zakoÅ„czone pomyÅ›lnie07:35:34 Status: Uzyskiwanie listy katalogów...07:35:34 Polecenie: CWD Aurora07:35:34 Odpowiedź 250 Current directory is /Hdd1/Aurora/07:35:34 Polecenie: PWD07:35:34 Odpowiedź 257 "/Hdd1/Aurora/"07:35:34 Polecenie: PASV07:35:34 Odpowiedź 227 Entering Passive Mode (192,168,1,200,195,80)07:35:34 Polecenie: LIST -a07:35:34 Odpowiedź 150 Opening connection07:35:43 Odpowiedź 226 Transfer complete07:35:43 Status: Listowanie katalogów zakoÅ„czone pomyÅ›lnie07:35:47 Status: Uzyskiwanie listy katalogów...07:35:47 Polecenie: CDUP07:35:47 Odpowiedź 250 Current directory is /Hdd1/07:35:47 Polecenie: PWD07:35:47 Odpowiedź 257 "/Hdd1/"07:35:47 Status: Listowanie katalogów zakoÅ„czone pomyÅ›lnie07:35:50 Status: Uzyskiwanie listy katalogów...07:35:50 Polecenie: CWD Content07:35:50 Odpowiedź 250 Current directory is /Hdd1/Content/07:35:50 Polecenie: PWD07:35:50 Odpowiedź 257 "/Hdd1/Content/"07:35:50 Polecenie: PASV07:35:50 Odpowiedź 227 Entering Passive Mode (192,168,1,200,195,80)07:35:50 Polecenie: LIST -a07:35:50 Odpowiedź 150 Opening connection07:35:59 Odpowiedź 226 Transfer complete07:35:59 Status: Listowanie katalogów zakoÅ„czone pomyÅ›lnie07:36:03 Status: Uzyskiwanie listy katalogów...07:36:03 Polecenie: CWD 000000000000000007:36:03 Odpowiedź 250 Current directory is /Hdd1/Content/0000000000000000/07:36:03 Polecenie: PWD07:36:03 Odpowiedź 257 "/Hdd1/Content/0000000000000000/"07:36:03 Polecenie: PASV07:36:03 Odpowiedź 227 Entering Passive Mode (192,168,1,200,195,80)07:36:03 Polecenie: LIST -a07:36:03 Odpowiedź 150 Opening connection07:36:12 Odpowiedź 226 Transfer complete07:36:12 Status: Listowanie katalogów zakoÅ„czone pomyÅ›lnie07:36:15 Status: Uzyskiwanie listy katalogów...07:36:15 Polecenie: CWD 4156081C07:36:15 Odpowiedź 250 Current directory is /Hdd1/Content/0000000000000000/4156081C/07:36:15 Polecenie: PWD07:36:15 Odpowiedź 257 "/Hdd1/Content/0000000000000000/4156081C/"07:36:15 Polecenie: PASV07:36:15 Odpowiedź 227 Entering Passive Mode (192,168,1,200,195,80)07:36:15 Polecenie: LIST -a07:36:15 Odpowiedź 150 Opening connection07:36:15 Odpowiedź 226 Transfer complete07:36:15 Status: Listowanie katalogów zakoÅ„czone pomyÅ›lnie07:36:18 Status: Uzyskiwanie listy katalogów...07:36:18 Polecenie: CWD 0000000207:36:18 Odpowiedź 250 Current directory is /Hdd1/Content/0000000000000000/4156081C/00000002/07:36:18 Polecenie: PWD07:36:18 Odpowiedź 257 "/Hdd1/Content/0000000000000000/4156081C/00000002/"07:36:18 Polecenie: PASV07:36:18 Odpowiedź 227 Entering Passive Mode (192,168,1,200,195,80)07:36:18 Polecenie: LIST -a07:36:18 Odpowiedź 150 Opening connection07:36:18 Odpowiedź 226 Transfer complete07:36:18 Status: Listowanie katalogów zakoÅ„czone pomyÅ›lnie07:36:22 Status: ÅÄ…czenie z 192.168.1.200:21...07:36:22 Status: PoÅ‚Ä…czenie nawiÄ…zanie, oczekiwanie na wiadomość powitalnÄ…...07:36:22 Odpowiedź 220 FtpDll Ready07:36:22 Polecenie: USER xboxftp07:36:22 Odpowiedź 331 User xboxftp OK, need password07:36:22 Polecenie: PASS *******07:36:22 Odpowiedź 230 User logged in07:36:22 Polecenie: OPTS UTF8 ON07:36:22 Odpowiedź 502 Command not found07:36:22 Status: PoÅ‚Ä…czono07:36:22 Status: Rozpoczynanie pobierania /Hdd1/Content/0000000000000000/4156081C/00000002/11DE42537A553E5D89499983E93751E045F78F884107:36:22 Polecenie: CWD /Hdd1/Content/0000000000000000/4156081C/0000000207:36:22 Odpowiedź 250 Current directory is /Hdd1/Content/0000000000000000/4156081C/00000002/07:36:22 Polecenie: PWD07:36:22 Odpowiedź 257 "/Hdd1/Content/0000000000000000/4156081C/00000002/"07:36:22 Polecenie: TYPE A07:36:22 Odpowiedź 200 Type set to A07:36:22 Polecenie: PASV07:36:22 Odpowiedź 227 Entering Passive Mode (192,168,1,200,195,81)07:36:22 Polecenie: RETR 11DE42537A553E5D89499983E93751E045F78F884107:36:22 Odpowiedź 150 Waiting for connection07:40:12 BÅ‚Ä…d: Transfer plików przerwany przez użytkownika po przeniesieniu 194 920 960 bajtów w 230 sekund07:40:12 Odpowiedź 550 Connection interrupted Here is my FTP log from Filezilla. I have started a transfer and the speed was around 800KB/s where normally I can download 2MB/s without any problems from other sites. From my NAS the speed is around 10MB/s. What can be wrong? The strange thing is that after this connection I have connected once again to Aurora FTP. This time everything was ultra fast. Like normally is when you browse FTP locally. And after few minutes and another try to connect it's once again very slow. Another log is here, this time in English. 07:48:50 Status: Connecting to 192.168.1.200:21...07:48:59 Status: Connection established, waiting for welcome message...07:48:59 Response: 220 FtpDll Ready07:48:59 Command: USER xboxftp07:48:59 Response: 331 User xboxftp OK, need password07:48:59 Command: PASS *******07:48:59 Response: 230 User logged in07:48:59 Command: SYST07:48:59 Response: 215 UNIX Type: L807:48:59 Command: FEAT07:48:59 Response: 211-Extensions supported:07:48:59 Response: CDUP07:48:59 Response: UTF807:48:59 Response: 211 END07:48:59 Command: OPTS UTF8 ON07:48:59 Response: 502 Command not found07:48:59 Status: Connected07:48:59 Status: Retrieving directory listing...07:48:59 Command: PWD07:48:59 Response: 257 "/"07:48:59 Command: TYPE I07:48:59 Response: 200 Type set to I07:48:59 Command: PASV07:48:59 Response: 227 Entering Passive Mode (192,168,1,200,195,80)07:48:59 Command: LIST07:48:59 Response: 150 Opening connection07:49:08 Response: 226 Transfer complete07:49:08 Command: PASV07:49:08 Response: 227 Entering Passive Mode (192,168,1,200,195,80)07:49:08 Command: LIST -a07:49:08 Response: 150 Opening connection07:49:17 Response: 226 Transfer complete07:49:17 Status: Directory listing successful07:49:28 Status: Retrieving directory listing...07:49:28 Command: CWD Hdd107:49:28 Response: 250 Current directory is /Hdd1/07:49:28 Command: PWD07:49:28 Response: 257 "/Hdd1/"07:49:28 Command: PASV07:49:28 Response: 227 Entering Passive Mode (192,168,1,200,195,80)07:49:28 Command: LIST -a07:49:28 Response: 150 Opening connection07:49:37 Response: 226 Transfer complete07:49:37 Status: Directory listing successful07:49:53 Status: Retrieving directory listing...07:49:53 Command: CWD Content07:49:53 Response: 250 Current directory is /Hdd1/Content/07:49:53 Command: PWD07:49:53 Response: 257 "/Hdd1/Content/"07:49:53 Command: PASV07:49:53 Response: 227 Entering Passive Mode (192,168,1,200,195,80)07:49:53 Command: LIST -a07:49:53 Response: 150 Opening connection07:50:02 Response: 226 Transfer complete07:50:02 Status: Directory listing successful07:50:04 Status: Retrieving directory listing...07:50:04 Command: CWD 000000000000000007:50:04 Response: 250 Current directory is /Hdd1/Content/0000000000000000/07:50:04 Command: PWD07:50:04 Response: 257 "/Hdd1/Content/0000000000000000/"07:50:04 Command: PASV07:50:04 Response: 227 Entering Passive Mode (192,168,1,200,195,80)07:50:04 Command: LIST -a07:50:04 Response: 150 Opening connection07:50:13 Response: 226 Transfer complete07:50:13 Status: Directory listing successful07:50:14 Status: Retrieving directory listing...07:50:14 Command: CWD 454108CE07:50:14 Response: 250 Current directory is /Hdd1/Content/0000000000000000/454108CE/07:50:14 Command: PWD07:50:14 Response: 257 "/Hdd1/Content/0000000000000000/454108CE/"07:50:14 Command: PASV07:50:14 Response: 227 Entering Passive Mode (192,168,1,200,195,80)07:50:14 Command: LIST -a07:50:14 Response: 150 Opening connection07:50:24 Response: 226 Transfer complete07:50:24 Status: Directory listing successful07:50:25 Status: Retrieving directory listing...07:50:25 Command: CWD 0000400007:50:25 Response: 250 Current directory is /Hdd1/Content/0000000000000000/454108CE/00004000/07:50:25 Command: PWD07:50:25 Response: 257 "/Hdd1/Content/0000000000000000/454108CE/00004000/"07:50:25 Command: PASV07:50:25 Response: 227 Entering Passive Mode (192,168,1,200,195,80)07:50:25 Command: LIST -a07:50:25 Response: 150 Opening connection07:50:34 Response: 226 Transfer complete07:50:34 Status: Directory listing successful07:50:36 Status: Retrieving directory listing...07:50:36 Command: CWD 193940DB8E88E341090500ED6EE5A52F.data07:50:36 Response: 250 Current directory is /Hdd1/Content/0000000000000000/454108CE/00004000/193940DB8E88E341090500ED6EE5A52F.data/07:50:36 Command: PWD07:50:36 Response: 257 "/Hdd1/Content/0000000000000000/454108CE/00004000/193940DB8E88E341090500ED6EE5A52F.data/"07:50:36 Command: PASV07:50:36 Response: 227 Entering Passive Mode (192,168,1,200,195,80)07:50:36 Command: LIST -a07:50:36 Response: 150 Opening connection07:50:45 Response: 226 Transfer complete07:50:45 Status: Directory listing successful07:50:47 Status: Disconnected from server It looks like it's really something on my side. I have tried FSD again and FTP acts the same. What is strange (as I never seen that before) is a command that's in Total Commander: Server reports local IP -> Redirect to: 192.168.1.200 The connection hangs on that ifno. I'm connecting to the same IP. Why does it redirect me? Maybe it's just me or my lack of knowledge. I will try and figure what's going on. Also I will try a different computer in my network to check how FTP will work. Quote Share this post Link to post Share on other sites