Jump to content
RealModScene
JPizzle

XeBuild GUI 2.094 : 16767 kernel support added

Recommended Posts

17148 new dash out recently.

xexbuild1.13 and dl 3.13 worked great for me updating via ftp and command line ect.

Share this post


Link to post
Share on other sites

So what - wait for a new xebuildgui to flash to 17148?

Wait for us to release it yeah, there's no need for 17148 yet anyways...

Sent from my GT-I9300 using Tapatalk

Share this post


Link to post
Share on other sites

I have no problems from Germany, to download the File. Perhaps its a routing Problem by your ISP.

Share this post


Link to post
Share on other sites

issues with download. on third try, first freeze at 28% and 2nd is 36%, on third go now. still at 38%

win8.1 64 bit ran as admin and firewall disabled.

There's nothing i can do to solve that =/

What you can do is download it manually from http://gxarena.com/Firmwares/Xbox360/

Share this post


Link to post
Share on other sites

Hi Swizzy,

I seem to still be getting the following error after loading my dump file:

 

ERROR: Can't determine if it's a big or small block nand, do you want to continue anyways? (this is a sign that your nand is not properly dumpted)

 

Also, after inputing my CPUKey I now get the following:

 

"ERROR: Unable to decrypt kv! either it's corrupt or the CPUKey you supplied is incorrect!"

Any help would be greatly appreciated - Thank you and great work as always!

Share this post


Link to post
Share on other sites

Redump nand, it is corrupt. I would suggest using xebuild updserv option(I use j-runner, and the dashlaunch installer), if the xbox boots, or if it doesnt, create a donor nand, and flash that. What console type do you have, as 4gb coronas have been known to have issues with the bga nand, where you cant read/write to them after a point. your nand could also have a bad block in the first 50 blocks, which could also cause these issues, in which case, you will have to manually remap the bad block from the reserve area, back to the area it would normally be. If you could upload a copy of your nand, and your cpu key and send me a link in a pm, I will take a look at it for you.

Share this post


Link to post
Share on other sites

Hi Swizzy,

I seem to still be getting the following error after loading my dump file:

 

Also, after inputing my CPUKey I now get the following:

Any help would be greatly appreciated - Thank you and great work as always!

What dump size do you have? 48MB or something else? (if it's 48MB it's a 4GB corona and this is normal, read this guide for more info: http://xebuildtut.xeupd.com/ any other size; it's a bad dump)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...