Sayed Ahmed 0 Posted November 25, 2014 hi i have problem with cod advansed warfare i joined the roomhere there is no host to enter game ( room i choice it )the same problem with cod black ops 2 i hope to help me sorry about my bad english Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 25, 2014 2 things: Do you have the latest TU installed? (same as everyone else) If you run a LiNK test (Verify Link Settings) does all tests pass? 1 Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 26, 2014 2 things: Do you have the latest TU installed? (same as everyone else) If you run a LiNK test (Verify Link Settings) does all tests pass? i use TU4 ( the last ) everything is pass Except data port and broadcast port Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 26, 2014 everything is pass Except data port and broadcast port That's why it's not working you're unable to communicate with anyone outside of your own network... which is a must... so... go read a tutorial on how to setup LiNK 1 Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 26, 2014 That's why it's not working you're unable to communicate with anyone outside of your own network... which is a must... so... go read a tutorial on how to setup LiNK i do all things still not work Quote Share this post Link to post Share on other sites
Anonymous 95 Posted November 26, 2014 i do all things still not work 1)Make sure you hav been use static ip for your Console in router setting2)Show me your portforward settings,,, Sent from my ST23i using Tapatalk 1 Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 26, 2014 1)Make sure you hav been use static ip for your Console in router setting 2)Show me your portforward settings,,, Sent from my ST23i using Tapatalk hi Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 26, 2014 Should work, if not... it's probably a incompatible router :/ 1 Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 26, 2014 Should work, if not... it's probably a incompatible router :/ do you think the problem because xell when i do backup there is somethings error Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 26, 2014 do you think the problem because xell when i do backup there is somethings error Send me your nand dump and i'll check if there's a problem with it, but... this shouldn't cause the port tests in LiNK not to work... it'd cause other issues... 1 Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 26, 2014 Send me your nand dump and i'll check if there's a problem with it, but... this shouldn't cause the port tests in LiNK not to work... it'd cause other issues...i send nand dump to you ( massage )i open DMZ in my router with xbox ip .... its ok or not Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 26, 2014 XeLL doesn't matter for LiNK... it's not loaded or anything anyways... and the freezing you have there is because of your DVD, it's a known bug that i think i fixed, but haven't gotten it fully verified nor did i release an update with it (in binary form, just the code on github) The 3 badblocks in your NAND all belong in xenonjklatin.xtt which is just the Japanese/Korean font file so those badblocks don't matter either, opening up DMZ is mainly meant for testing, if it works when you have DMZ active for your console, your portforwarding settings are incorrect... 1 Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 27, 2014 DMZ is opening with xbox ip ..... i check the game still not work what i should to do in port forwarding ? Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 27, 2014 DMZ is opening with xbox ip ..... i check the game still not work what i should to do in port forwarding ? If DMZ isn't working etheir, then it's etheir a connection issue or a incompatible router... but, it could also be caused by a dashlaunch plugin... the more likely cause is incompatible router or connection issues... 1 Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 27, 2014 If DMZ isn't working etheir, then it's etheir a connection issue or a incompatible router... but, it could also be caused by a dashlaunch plugin... the more likely cause is incompatible router or connection issues... everything is ok in dashlaunch Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 27, 2014 everything is ok in dashlaunch You sure? you have no plugins loaded there? (plugin1 is empty, so is the other ones, or it's not there at all?) if that's the case, it's either your connection or your router... 1 Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 27, 2014 You sure? you have no plugins loaded there? (plugin1 is empty, so is the other ones, or it's not there at all?) if that's the case, it's either your connection or your router... all of plugins is none what i should to do ? Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 27, 2014 all of plugins is none what i should to do ? Try rebooting your router/modem, try calling your ISP and ask them if there's a problem with port forwarding, if there isn't... it's a router issue and you need to find a better router 1 Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 28, 2014 Try rebooting your router/modem, try calling your ISP and ask them if there's a problem with port forwarding, if there isn't... it's a router issue and you need to find a better router you say if UPNP enable ... don't need to port forwarding so , the problem is not from router sorry about my bad english Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 28, 2014 you say if UPNP enable ... don't need to port forwarding so , the problem is not from router sorry about my bad english Yes, if UPNP is enabled your router should handle the portforwarding on it's own... so, could still be a router issue... if the router doesn't have proper upnp support, it won't forward the ports properly... 1 Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 28, 2014 Yes, if UPNP is enabled your router should handle the portforwarding on it's own... so, could still be a router issue... if the router doesn't have proper upnp support, it won't forward the ports properly... UPNP is enabled in router so , what is next ? Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 28, 2014 UPNP is enabled in router so , what is next ? you've restarted both your router and your modem? What type of connection do you have? if you're not sure, call your ISP and ask them... 1 Quote Share this post Link to post Share on other sites
Anonymous 95 Posted November 28, 2014 UPNP is enabled in router so , what is next ? Fine,,makesure sure static ip in router for your ConsoleEnable upnp check box in your custom dash That's it ,,it should be working Sent from my ST23i using Tapatalk 1 Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 28, 2014 you've restarted both your router and your modem? What type of connection do you have? if you're not sure, call your ISP and ask them... yes i restarted both i have 4g router wired connection with xbox Quote Share this post Link to post Share on other sites
Sayed Ahmed 0 Posted November 28, 2014 Fine,,makesure sure static ip in router for your Console Enable upnp check box in your custom dash That's it ,,it should be worked Sent from my ST23i using Tapatalk ip is right i check upnp it is enable Quote Share this post Link to post Share on other sites
