petyas 0 Posted November 23, 2014 Hi, after update my Jasper/RGH 1 to dash 16747 using xeBuild GUI 2.093, i have a problem with DashLaunch 3.12. I can't boot directly to FSD or Aurora, i can't setup anything. DL works after that moment i tried change something. When i click on Paths/Default it freeze, when i trying enabled xhttp and click on that item, it freeze. What i'm doing wrong? Thanks for help or any ideas. My log is below. ------------------------------------------------------------------------ Unhandled Exception: The thread tried to read from or write to a virtual address for which it does not have access. ------------------------------------------------------------------------ Faulting Module Info: FullName : \Device\Flash\launch.xex BaseName : launch.xex PEName : launch.dll ImageBase : 91F00000 SizeOfFullImage: 00020000 EntryPoint : 91F0E3D8 ------------------------------------------------------------------------ EADDR: 0x91F06024 ECODE: 0xC0000005 EFLAG: 0 (cont) NPARM: 2 PARAM 00: 0x00000000 PARAM 01: 0x305C0000 CFLAG: 0x00000017 ------------------------------------------------------------------------ Control Registers: MSR: 0x00009030 IAR: 0x91F06024 LR : 0x91F0B5C8 CTR: 0x0000000091F0B580 ------------------------------------------------------------------------ Integer Registers: CR : 0x22000442 XER: 0x20000000 r0 : 0x0000000000000000 r1 : 0x000000007004F080 r2 : 0x0000000000000000 r3 : 0x0000000091F034C0 r4 : 0x000000007004F1B0 r5 : 0x0000000000000010 r6 : 0x0000000000000002 r7 : 0x0000000038600001 r8 : 0x0000000000000000 r9 : 0xFFFFFFFF91F1D34C r10: 0x0000000000000000 r11: 0x00000000305C0000 r12: 0x0000000091F0A794 r13: 0x00000000801B0000 r14: 0x0000000000000000 r15: 0x0000000000000000 r16: 0x0000000000000000 r17: 0x0000000000000000 r18: 0x0000000000000000 r19: 0x0000000000000000 r20: 0x000000008007A8B0 Quote Share this post Link to post Share on other sites
Anonymous 95 Posted November 23, 2014 Best way wait for swizzy reply My thought is try to reflash your Console maybe your problem solved Sent from my ST23i using Tapatalk Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 23, 2014 Honestly, no idea why this is happening, but as Anonymous said, try reflashing... use this guide: http://xebuildtut.xeupd.com/ and download all files fresh, also try using Simple 360 NAND Flasher 1.4b found here: http://www.realmodscene.com/index.php?/topic/3962-simple-360-nand-flasher-14b/ Quote Share this post Link to post Share on other sites
petyas 0 Posted November 23, 2014 Best way wait for swizzy reply My thought is try to reflash your Console maybe your problem solved Sent from my ST23i using Tapatalk I tried it 3 times. Firstly i tried NAND 16747 next 16767 and than back to 16747. In some thred i read about wrong INI files in XeBuild for 16747 so i tried moreover append to _glitch.ini this last line as was in previous dash versions: ..\launch.xex, ..\lhelper.xex, ..\launch.ini, but without success. :-( Quote Share this post Link to post Share on other sites
petyas 0 Posted November 23, 2014 Honestly, no idea why this is happening, but as Anonymous said, try reflashing... use this guide: http://xebuildtut.xeupd.com/ and download all files fresh, also try using Simple 360 NAND Flasher 1.4b found here: http://www.realmodscene.com/index.php?/topic/3962-simple-360-nand-flasher-14b/ Thanks a lot Swizzy, definitely i'll try it. The guide you mentioned i'm using. And what about _glitch.ini? It's correct to have it last three lines like i posted? Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 23, 2014 Thanks a lot Swizzy, definitely i'll try it. The guide you mentioned i'm using. And what about _glitch.ini? It's correct to have it last three lines like i posted? Yes, they should be like that if they're not... the only one that shouldn't have that is retail.ini if you used a package which has 16767, that's probably the reason for the problem, it includes a unofficial dashlaunch that has been patched to work with 16767... the patch causes all kinds of issues, even if used on 16747... this particular one is one of the ones i've seen happen with the unofficial one (mainly on 16756 and 16767) Quote Share this post Link to post Share on other sites
petyas 0 Posted November 23, 2014 Yes, they should be like that if they're not... the only one that shouldn't have that is retail.ini if you used a package which has 16767, that's probably the reason for the problem, it includes a unofficial dashlaunch that has been patched to work with 16767... the patch causes all kinds of issues, even if used on 16747... this particular one is one of the ones i've seen happen with the unofficial one (mainly on 16756 and 16767) Great success. Finally everythings works as a charm. Heureka. I've used your Simple 360 NAND Flasher 1.4b. Moreover i've found out, that in package with xeBuild GUI 2.093 was xeBuild 1.07. I've change it to 1.12 and after NAN reflash Dashlaunch works great and Aurora booting. Thanks a lot for your time and ideas . Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 23, 2014 (edited) Great success. Finally everythings works as a charm. Heureka. I've used your Simple 360 NAND Flasher 1.4b. Moreover i've found out, that in package with xeBuild GUI 2.093 was xeBuild 1.07. I've change it to 1.12 and after NAN reflash Dashlaunch works great and Aurora booting. Thanks a lot for your time and ideas . Really? the official package have 1.07? o.O that's funky... ** Edit: ** Nope, the official package have 1.12, so you were using a unofficial one which explains alot I can only really offer support for official packages/releases/versions, unofficial ones i cannot really offer support for as i have no idea what they've done or what's included etc. that's also why i recommend using the official package, it's been tested by me and a bunch of my close friends before we release, the GUI package doesn't get alot of testing lately as there's not much to test, all i really do is update the xml's along with xebuild.exe, the dashlaunch files and well everything related to xebuild, i also recompile it so it's easier to tell that it's the new package that's being used when reading the log etc. There's been no major changes in the GUI for quite some time, eventually i'll be releasing a whole new GUI for xeBuild with all the new options and much much more features... but... i've had a bad case of lack of motivation for a while... Edited November 23, 2014 by Swizzy 1 Quote Share this post Link to post Share on other sites
rubensyama 107 Posted November 30, 2014 I was very happy to know that the (Swizzy) is creating motivation to upgrade - Dash-Launch - predict a light at the end of the tunnel -( motivation and All ) Quote Share this post Link to post Share on other sites