Camz Uno 0 Posted November 25, 2013 hi have manage to turn on my xbox again...cuz my first problem is my xbox is not booting.. before this happen i have update my dashlunch to 3.10 and kernel 16537. ok here is what it say on xbuild --------------------------------------------------------------- xeBuild v1.07.632 --------------------------------------------------------------- ---- { Update Mode } ---- data directory set from command line to '16537' started, watching network for xbox...success, found xbox beacon at 192.168.0.100 attempting to connect...success! Getting console info...success! connected to Corona with updsvr version 2 (peek version 2) NAND image size: 0x1080000 Block size: 0x4200 Spare Data: Yes ------ parsing console info response ------ Console Current Info: running kernel : 2.0.16537.0 bootstrap type : Corona hardware type : Corona hardware flags : 0x50000247 internal HDD : not present Image Type : Corona (Glitch2) Virtual Fuses : not present DVD key : 60A402F84A350FEC15A95805A4FFEBB7 1BL key : DD88AD0C9ED669E7B56794FB68563EFA (good) 1BL RSA pub : good PIRS RSA pub : good MASTER RSA pub : good CPU Key set to : 49ED99D7ACED99A041B95326A26D1816 (weight:0x35 valid; ecd: valid) 1BL Key set to: 0xDD88AD0C9ED669E7B56794FB68563EFA sum: 0x983 (expects: 0x983) xex Key set to: 0x20B185A59D28FDC340583FBB0896BF91 sum: 0x800 (expects: 0x800) Xell Reason : console eject button CF LDV : 3 Pairing Value : 0x4dac5c pairing set to: 4d ac 5c ------ parsing ini at '16537_glitch2.ini' ------ ini version 16537 ini: label [coronabl] found found (1) 'cba_13121.bin' crc: 0x9255dfb1 found (2) 'cbb_13121.bin' crc: 0x6f3f9c18 found (3) 'cd_12905.bin' crc: 0x58221592 found (4) 'ce_1888.bin' crc: 0xff9b60df found (5) 'cf_16537.bin' crc: 0xd2f70347 found (6) 'cg_16537.bin' crc: 0xcf8a8c3c ini dictates dual CB for this model ini: label [flashfs] found found (1) 'aac.xexp' crc: 0x340f017f found (2) 'bootanim.xex' crc: 0x1a64dd1c found (3) 'createprofile.xex' crc: 0xbb5dfa34 found (4) 'dash.xex' crc: 0x40671195 found (5) 'deviceselector.xex' crc: 0xf80b066f found (6) 'gamerprofile.xex' crc: 0xb55d0d4f found (7) 'hud.xex' crc: 0xd1e27e82 found (8) 'huduiskin.xex' crc: 0x98c75ba1 found (9) 'mfgbootlauncher.xex' crc: 0x773ee67d found (10) 'minimediaplayer.xex' crc: 0x0411007d found (11) 'nomni.xexp' crc: 0x323c6e47 found (12) 'nomnifwk.xexp' crc: 0xbe5a4208 found (13) 'nomnifwm.xexp' crc: 0xc9c3f0e0 found (14) 'SegoeXbox-Light.xtt' crc: 0xe0ee6049 found (15) 'signin.xex' crc: 0x4dd243b2 found (16) 'updater.xex' crc: 0xe93cef2e found (17) 'vk.xex' crc: 0xac383a80 found (18) 'xam.xex' crc: 0x18496d9a found (19) 'xenonclatin.xtt' crc: 0xd5d17ff5 found (20) 'xenonclatin.xttp' crc: 0x7a507ad1 found (21) 'xenonjklatin.xtt' crc: 0xdde4a14c found (22) 'xenonjklatin.xttp' crc: 0xe2adddfb found (23) 'ximecore.xex' crc: 0xc558548c found (24) 'ximedic.xex' crc: 0x1d992bfb found (25) 'ximedic.xexp' crc: 0x4da51d92 found (26) '..launch.xex' crc: 0x00000000 found (27) '..lhelper.xex' crc: 0x00000000 found (28) '..launch.ini' crc: 0x00000000 ini: label [security] found found (1) 'crl.bin' crc: 0x00000000 found (2) 'dae.bin' crc: 0x00000000 found (3) 'extended.bin' crc: 0x00000000 found (4) 'fcrt.bin' crc: 0x00000000 found (5) 'secdata.bin' crc: 0x00000000 ------ ini parsing completed ------ ------ getting bad blocks ------ processing 1 bad blocks on device marking bad block at 0x3df cleaning up stray remaps block 0x3df had no remap, assigning remap block 0x3ff done! mounting SystemRoot to usv:...success! ------ getting security files ------ retrieving USVRcrl.bin...OK, received 0xa00 bytes verified! Will use if external file not found. retrieving USVRdae.bin...OK, received 0x7090 bytes verified! Will use if external file not found. retrieving USVRextended.bin...OK, received 0x4000 bytes verified! Will use if external file not found. retrieving USVRfcrt.bin...OK, received 0x4000 bytes verified! Will use if external file not found. retrieving USVRsecdata.bin...OK, received 0x400 bytes verified! Will use if external file not found. retrieving USVRkv_enc...OK, received 0x4000 bytes decrypt and verify...keyvault is good! retrieving USVRsmc_enc...OK, received 0x3800 bytes decrypt and verify...smc is good! ------ getting mobile settings ------ retrieving USVRMobileB.dat...OK, received 0x800 bytes retrieving USVRMobileC.dat...OK, received 0x200 bytes retrieving USVRMobileD.dat...OK, received 0x800 bytes retrieving USVRMobileE.dat...OK, received 0x800 bytes retrieving USVRMobileF.dat...not available retrieving USVRMobileG.dat...not available retrieving USVRMobileH.dat...not available retrieving USVRMobileI.dat...not available retrieving USVRMobileJ.dat...not available retrieving USVRStatistics.settings...OK, received 0x400 bytes retrieving USVRManufacturing.data...OK, received 0x80 bytes console has no available blmod console has no available addons retrieving USVRStatic.settings (smc_config.bin)...OK, received 0x4000 bytes verifying...smc_config is good! Writing initial header to flash image ------ loading system update container ------ system update container not found at 16537su20076000_00000000, trying alt 16537$SystemUpdatesu20076000_00000000 found, loading...done! Read 0xb34000 bytes to memory checking integrity... header seems valid, version 2.0.16537.0 header hash is OK, checking content hashes... content hashes seem OK, everything looks good! extracted SUPDxboxupd.bin (0x7a010 bytes) decrypting SUPDxboxupd.binCF_16537.bin (0x4560 bytes)...done! decrypting SUPDxboxupd.binCG_16537.bin (0x75aa2 bytes)...done! ------ Loading bootloaders and required security files ------ reading smc.bin failed, using smc.bin from nand dump reset smc load address to 0x800 size 0x3800 reading kv.bin failed, using kv.bin from nand dump reading .commoncba_13121.bin (0x1af0 bytes) loaded cba_13121.bin, signature check passed! reading .commoncbb_13121.bin (0x7b40 bytes) reading .commoncd_12905.bin (0x5090 bytes) reading .commonce_1888.bin (0x5606a b pad 0x56070 xell not found in perbuild directory, checking firmware /bin folder xell not found in firmware /bin folder, checking base path reading xell-gggggg.bin (0x40000 bytes) extracted SUPDxboxupd.binCF_16537.bin (0x4560 bytes) extracted SUPDxboxupd.binCG_16537.bin (0x75aa2 bytes) reading 16537binpatches_g2corona.bin (0x894 bytes) reading smc_config.bin failed, using smc_config.bin from nand dump ------------------- checking smc_config ------------------- extracting config ------------------ SMC config info: ------------------ Target temps: Cpu: 82øC Gpu: 78øC Edram: 76øC Max temps : Cpu: 89øC Gpu: 82øC Edram: 82øC Cpu Fan : (auto) Gpu Fan : (auto) MAC Address : 7c:1e:52:d7:3a:db AVRegion : 0x00000200 (NTSC-J) GameRegion : 0x01fc (NTSC/KOR) DVDRegion : 3 resetKey : AAYD --------------------- Checking for smc config data patches smc config was not patched --------------------- done! patch slot offset reset to: 0xb0000 ------ Patching BLs and modifying patches ------ Patching BLs...Done! ------ Patching boot reasons and options into flash header ------ Patching header for xell power reason ------ Encrypting and finalizing bootloaders ------ encoding smc.bin size 0x3800 SMC checksum: 39a623be unknown SMC found, type: Corona v6.2(2.05) glitch hack found in smc.bin! encoding kv.bin size 0x4000 decrypted keyvault has been set for reference Keyvault hash is good! encoding cba_13121.bin size 0x1af0 encoding cbb_13121.bin size 0x7b40 CB 13121 seq 0x03020002 type: 0x03 cseq: 0x02 allow: 0x0002 expected fuses: fuseset 00: C0FFFFFFFFFFFFFF fuseset 01: 0F0F0F0F0F0FF0F0 fuseset 02: 0F00000000000000 (sequence) fuseset 02: 0F00000000000000 (allow cseq 2) **dual CB flag detected!** encoding cd_12905.bin size 0x5400 encoding ce_1888.bin size 0x56070 encoding xell-gggggg.bin size 0x40000 encoding cf_16537.bin size 0x4560 encoding cg_16537.bin size 0x75ab0 encoding patches_g2corona.bin size 0x4b8 done! ------ Adding bootloaders to flash image ------ adding smc.bin at raw offset 0x00000800 len 0x3800 (end 0x4000) adding kv.bin at raw offset 0x00004000 len 0x4000 (end 0x8000) adding cba_13121.bin at raw offset 0x00008000 len 0x1af0 (end 0x9af0) adding cbb_13121.bin at raw offset 0x00009af0 len 0x7b40 (end 0x11630) adding cd_12905.bin at raw offset 0x00011630 len 0x5400 (end 0x16a30) adding ce_1888.bin at raw offset 0x00016a30 len 0x56070 (end 0x6caa0) adding xell-gggggg.bin at raw offset 0x00070000 len 0x40000 (end 0xb0000) adding cf_16537.bin at raw offset 0x000b0000 len 0x4560 (end 0xb4560) adding cg_16537.bin at raw offset 0x000b4560 len 0x75ab0 (end 0xc0000, rest in fs) adding patches_g2corona.bin at raw offset 0x000c0010 len 0x4b8 (end 0xc04c8) Fixing up FS table...done! Writing zeropair CG patch slot overflow data to sysupdate.xexp1 at raw offset 0xd0000 len 0x0006a010 (end: 0x0013a010)...done! ------ adding 28 firmware files ------ extracted SUPDaac.xexp (0x14000 bytes) (crc32: 0x340f017f ini: 0x340f017f) adding as aac.xexp1 at raw offset 0x13a010 len 0x00014000 (end 0x0014e010) extracted SUPDbootanim.xex (0x61000 bytes) (crc32: 0x1a64dd1c ini: 0x1a64dd1c) adding as bootanim.xex at raw offset 0x150000 len 0x00061000 (end 0x001b1000) extracted SUPDcreateprofile.xex (0xc000 bytes) (crc32: 0xbb5dfa34 ini: 0xbb5dfa34) adding as createprofile.xex at raw offset 0x1b1000 len 0x0000c000 (end 0x001bd000) extracted SUPDdash.xex (0x597000 bytes) (crc32: 0x40671195 ini: 0x40671195) adding as dash.xex at raw offset 0x1c0000 len 0x00597000 (end 0x00757000) extracted SUPDdeviceselector.xex (0xa000 bytes) (crc32: 0xf80b066f ini: 0xf80b066f) adding as deviceselector.xex at raw offset 0x757000 len 0x0000a000 (end 0x00761000) extracted SUPDgamerprofile.xex (0x1b000 bytes) (crc32: 0xb55d0d4f ini: 0xb55d0d4f) adding as gamerprofile.xex at raw offset 0x762000 len 0x0001b000 (end 0x0077d000) extracted SUPDhud.xex (0x1d000 bytes) (crc32: 0xd1e27e82 ini: 0xd1e27e82) adding as hud.xex at raw offset 0x77f000 len 0x0001d000 (end 0x0079c000) extracted SUPDhuduiskin.xex (0x14000 bytes) (crc32: 0x98c75ba1 ini: 0x98c75ba1) adding as huduiskin.xex at raw offset 0x79d000 len 0x00014000 (end 0x007b1000) extracted SUPDmfgbootlauncher.xex (0x8000 bytes) (crc32: 0x773ee67d ini: 0x773ee67d) adding as mfgbootlauncher.xex at raw offset 0x7b4000 len 0x00008000 (end 0x007bc000) extracted SUPDminimediaplayer.xex (0xc000 bytes) (crc32: 0x0411007d ini: 0x0411007d) adding as minimediaplayer.xex at raw offset 0x7bc000 len 0x0000c000 (end 0x007c8000) extracted SUPDnomni.xexp (0xc800 bytes) (crc32: 0x323c6e47 ini: 0x323c6e47) adding as nomni.xexp1 at raw offset 0x7c8000 len 0x0000c800 (end 0x007d4800) extracted SUPDnomnifwk.xexp (0x2000 bytes) (crc32: 0xbe5a4208 ini: 0xbe5a4208) adding as nomnifwk.xexp1 at raw offset 0x7d4800 len 0x00002000 (end 0x007d6800) extracted SUPDnomnifwm.xexp (0x5000 bytes) (crc32: 0xc9c3f0e0 ini: 0xc9c3f0e0) adding as nomnifwm.xexp1 at raw offset 0x7da000 len 0x00005000 (end 0x007df000) extracted SUPDSegoeXbox-Light.xtt (0x6000 bytes) (crc32: 0xe0ee6049 ini: 0xe0ee6049) adding as SegoeXbox-Light.xtt at raw offset 0x7e1000 len 0x00006000 (end 0x007e7000) extracted SUPDsignin.xex (0x19000 bytes) (crc32: 0x4dd243b2 ini: 0x4dd243b2) adding as signin.xex at raw offset 0x7ea000 len 0x00019000 (end 0x00803000) extracted SUPDupdater.xex (0x7000 bytes) (crc32: 0xe93cef2e ini: 0xe93cef2e) adding as updater.xex at raw offset 0x805000 len 0x00007000 (end 0x0080c000) extracted SUPDvk.xex (0xb000 bytes) (crc32: 0xac383a80 ini: 0xac383a80) adding as vk.xex at raw offset 0x80f000 len 0x0000b000 (end 0x0081a000) extracted SUPDxam.xex (0x253000 bytes) (crc32: 0x18496d9a ini: 0x18496d9a) adding as xam.xex at raw offset 0x81b000 len 0x00253000 (end 0x00a6e000) retrieving USVRxenonclatin.xtt...OK, received 0x11b000 bytes extracted USVRxenonclatin.xtt (0x11b000 bytes) (crc32: 0xd5d17ff5 ini: 0xd5d17ff5) adding as xenonclatin.xtt at raw offset 0xa6f000 len 0x0011b000 (end 0x00b8a000) extracted SUPDxenonclatin.xttp (0x18000 bytes) (crc32: 0x7a507ad1 ini: 0x7a507ad1) adding as xenonclatin.xttp1 at raw offset 0xb8b000 len 0x00018000 (end 0x00ba3000) retrieving USVRxenonjklatin.xtt...OK, received 0x1a8000 bytes extracted USVRxenonjklatin.xtt (0x1a8000 bytes) (crc32: 0xdde4a14c ini: 0xdde4a14c) adding as xenonjklatin.xtt at raw offset 0xba4000 len 0x001a8000 (end 0x00d4c000) extracted SUPDxenonjklatin.xttp (0x7000 bytes) (crc32: 0xe2adddfb ini: 0xe2adddfb) adding as xenonjklatin.xttp1 at raw offset 0xd4c000 len 0x00007000 (end 0x00d53000) extracted SUPDximecore.xex (0x17000 bytes) (crc32: 0xc558548c ini: 0xc558548c) adding as ximecore.xex at raw offset 0xd53000 len 0x00017000 (end 0x00d6a000) retrieving USVRximedic.xex...OK, received 0x90000 bytes extracted USVRximedic.xex (0x90000 bytes) (crc32: 0x1d992bfb ini: 0x1d992bfb) adding as ximedic.xex at raw offset 0xd6b000 len 0x00090000 (end 0x00dfb000) extracted SUPDximedic.xexp (0x2800 bytes) (crc32: 0x4da51d92 ini: 0x4da51d92) adding as ximedic.xexp1 at raw offset 0xdfc000 len 0x00002800 (end 0x00dfe800) retrieving USVRlaunch.xex...OK, received 0xc800 bytes extracted USVRlaunch.xex (0xc800 bytes) adding as launch.xex at raw offset 0xdfe800 len 0x0000c800 (end 0x00e0b000) retrieving USVRlhelper.xex...OK, received 0x6000 bytes extracted USVRlhelper.xex (0x6000 bytes) adding as lhelper.xex at raw offset 0xe0c800 len 0x00006000 (end 0x00e12800) retrieving USVRlaunch.ini...failed! file not found on console ***** could not read file '..launch.ini', skipping ***** ------ adding 5 security files ------ <- Processing crl.bin -> could not read crl.bin, using data from SUPD... crl appears crypted, attempting to decrypt with CPU key...failed! Trying alternate key...success! adding as crl.bin at raw offset 0xe18000 len 0x00000a00 (end 0x00e18a00) <- Processing dae.bin -> could not read dae.bin, using data from SUPD... dae appears encrypted, attempting to decrypt with CPU key...failed! Attempting to decrypt with alternate key... success! adding as dae.bin at raw offset 0xe1c000 len 0x00007090 (end 0x00e23090) <- Processing extended.bin -> could not read extended.bin, using data from previous parse... adding as extended.bin at raw offset 0xe24000 len 0x00004000 (end 0x00e28000) <- Processing fcrt.bin -> could not read fcrt.bin, using data from previous parse... adding as fcrt.bin at raw offset 0xe28000 len 0x00004000 (end 0x00e2c000) <- Processing secdata.bin -> could not read secdata.bin, using data from previous parse... adding as secdata.bin at raw offset 0xe2c000 len 0x00000400 (end 0x00e2c400) ------ checking for Mobile*.dat ------ MobileB.dat found, adding from previous parse adding MobileB.dat as type 0x31 at raw offset 0xe30000 len 0x800 (end 0xe30800) MobileC.dat found, adding from previous parse adding MobileC.dat as type 0x32 at raw offset 0xe34000 len 0x200 (end 0xe34200) MobileD.dat found, adding from previous parse adding MobileD.dat as type 0x33 at raw offset 0xe38000 len 0x800 (end 0xe38800) MobileE.dat found, adding from previous parse adding MobileE.dat as type 0x34 at raw offset 0xe3c000 len 0x800 (end 0xe3c800) Statistics.settings found, adding from previous parse adding Statistics.settings at raw offset 0xf78000 len 0x400 (end 0xf78400) Manufacturing.data found, adding from previous parse adding Manufacturing.data at raw offset 0xf74000 len 0x80 (end 0xf74080) ------ adding smc_config.bin ------ adding smc config to offset 0x00f7c000, len 0x400 ------ finalizing image ------ Fixing up empty FS block entries...done! Writing FS table to image offset 0xe40000 len 0x4000 (end 0xe44000)...done! fixing up big block controller on small block NAND LBA numbers...done! calculating ECD bytes and assembling raw image...done! remapping 1 blocks copying 0x4200 bytes of LBA 0x3df to block 0x3ff...zero fill origin...done! done remapping! unmounting usv:...success! ------ flashing console ------ sending flash data to console... file sent OK, awaiting result...success! Completed in 2s ------ loading and sending avatar data ------ avatar data skipped, no HDD detected sending reboot command...OK 16537_g2_corona.bin image built, info: --------------------------------------------------------------- Kernel : 2.0.16537.0 Console : Corona NAND size : 16MiB Build : Glitch (v2) Xell : power on console with console eject button Serial : 192067323443 ConsoleId : 022790294678 MoboSerial: 7501259130032345 Mfg Date : 08/23/2012 CPU Key : 49ED99D7ACED99A041B95326A26D1816 1BL Key : DD88AD0C9ED669E7B56794FB68563EFA DVD Key : 60A402F84A350FEC15A95805A4FFEBB7 CF LDV : 3 KV type : type2 (hashed - Good! Signature is valid.) --------------------------------------------------------------- xeBuild Finished. Have a nice day. --------------------------------------------------------------- after this i'm playing nice for days..but my friend went here yesterday..while i'm playing he accidentaly turn my xbox off using the green light button on the consol. after nad hour i went to switch it on. now it won't boot. after 5hrs trying to boot. it boot again and now i went to look nand flasher for back up. i have back up my nand and here it is. Simple 360 NAND Flasher by Swizzy v1.3 (BETA) * Detecting NAND Type... * Detected RAW NAND device! * Entering NAND Mode... * Attempting to grab CPUKey... ! ERROR: Your dashboard is to old for this feature, sorry... use xell! ============= Console information: ============= Current Dashboard: 2.0.16537.0 ================================================ * Looking for simpleflasher.cmd for automatic features... game:simpleflasher.cmd NOT Found! * Entering Manual mode! Press X if you want to dump your nand with Rawdump v1 If you press anything else the application will close... config register = 000431C4 sfc:page_sz = 00000200 sfc:meta_sz = 00000010 sfc:page_sz_phys = 00000210 sfc:pages_in_block = 00000020 sfc:block_sz = 00004000 sfc:block_sz_phys = 00004200 sfc:size_mb = 16MB sfc:size_bytes = 01000000 sfc:size_bytes_phys = 01080000 sfc:size_pages = 00008000 sfc:size_blocks = 00000400 * rawdump v1 started (by Swizzy) game:flashdmp.bin opened OK, attempting to read 0x1080000 bytes from flash... ! SFCX: Bad block found at 000003DF NAND Dumped! Completed after 17.00 seconds Press any button to exit! after playing and hour i turn off my xbox and when i'm going to switch it on. it won't boot again..until today..i have tried to boot it again for another 4 or 5hrs again and it boot..lucky..wew..(even xell won't boot) i just wanna know if my xbuild and this nand flasher are all correct and should i flash nand and create a updflash.bin while my xbox still switch on..i hope you can help me out thank you.. ok i put the updflash.bin on a usb stick boot using dvd rom..xell show's up it went all..but it says at the last part that bad block..etc.. please shutdown your consol now..is that really right? Quote Share this post Link to post Share on other sites
johnnyblackout 30 Posted November 25, 2013 Do you have backups of your original nand? if you do load them up in J-runner, along with your CPU key and build the image in that. Your issue sounds more severe then just a bad NAND. I think it might be either faulty soldering or possible a fake glitch chip. Since you won't post pictures of the soldering or the mod-chip, nobody can tell for sure. Quote Share this post Link to post Share on other sites
croize 36 Posted November 25, 2013 If its a fake chip , She / he wouldnt be able to play at all ? As the person sais they could play awhile. Quote Share this post Link to post Share on other sites
Camz Uno 0 Posted November 25, 2013 well i can't post any picture's inside of my xbox cuz it's still have warranty and with warranty jtag..well right now it's working...i think the problem is my usb port hard disk going to xbox..but can't tell for sure..everytime i turn off my xbox and leave it turn off for 1 or 2hours it won't boot anymore unless i try to plug and unplug both side of the usb port. xbox going to my hard drive i'm just having this problem..after my friend switch of my xbox while i'm playing gta 5.but before that everything are ok.. i'm sorry i don't have have my original nand..my only back up is when i updated my kernel and dash launch.. to the latest version right now..and one more thing.. i went to info fsd looking at dash version it just say's 3.0. is that really correct? but i have a dash launch 3.10..hmmm really need help with this..and 1 more thing..i think i'm doing it wrong..everytime it won't boot up i tap my xbox and try to plug and unplug the usb port both side and sometime's my xbox will boot..thanks for the help guys..i really need it badly thanks what do you mean fake glitch chip? Quote Share this post Link to post Share on other sites
johnnyblackout 30 Posted November 25, 2013 This is really confusing to me. I've seen instances where a console will boot for a while with a fake coolrunner, but die after a few months. OP keeps stating he/she "still has a warranty". If the console is modded in ANY way, then the official Miscrosoft warranty is VOID. If you have a different warranty, say from the person who modded it for you, then I would return it to them and have them fix it. Either way, good luck with that. Quote Share this post Link to post Share on other sites
Camz Uno 0 Posted November 26, 2013 after checking all i have found the problem..it's my external hdd..the cause of the problem..yup all fix..but i want know if my kernel..and dash launch and my nand are all correct? with the log file that i have posted.. Quote Share this post Link to post Share on other sites
datastream 101 Posted November 26, 2013 yes it tells you. and if you go to metro dashboard (Stock) then have a look and it should tell you it's 16537 then you can check your dashlaunch etc. ------ flashing console ------ sending flash data to console... file sent OK, awaiting result...success! Completed in 2s ------ loading and sending avatar data ------ avatar data skipped, no HDD detected sending reboot command...OK 16537_g2_corona.bin image built, info: --------------------------------------------------------------- Quote Share this post Link to post Share on other sites
johnnyblackout 30 Posted November 26, 2013 Even with a faulty external HDD your console should boot fine. It might hang up on the xbox splash screen for a bit, but it should still boot. Either way if it's working to your satisfaction, then that's all that matters. Quote Share this post Link to post Share on other sites
datastream 101 Posted November 26, 2013 what about his warranty Quote Share this post Link to post Share on other sites
johnnyblackout 30 Posted November 26, 2013 Kind of reminds me of this scene from tommy boy: http://www.youtube.com/watch?v=a5dpBpaFiMo 2 Quote Share this post Link to post Share on other sites
datastream 101 Posted November 26, 2013 Lol... like it. sent from my iphone5 Quote Share this post Link to post Share on other sites
