JQE 0 Posted October 22, 2012 update ---> Rogero CEX-4.21 v1.09 MD5: e777351e788a7eb4007a2280abca7fbd Size : 192 MB (201,329,483 bytes) v1.09 Details and Changes - Compatibility problem with some Slim models (CECH-25xx) is now fully fixed. - XMB Icons problem from in-game PS button is now fixed. - Loading games from App_home Icon is now fixed. - Many other fixes from version 1.00 for a better performance and added stability. - It was tested by hundreds of testers on all PS3 models (FAT & Slim) and no problems were encountered. - It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed - Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games). - Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21. ATTENTION: 1- This CFW doesn't have LV1 checks disabled and can't be installed on Downgraded PS3 consoles unless you have Dehashed/Reset Syscon Properly (if you're not sure about your PS3, Dehash it anyway to avoid any risk) Link ----> Dehashing Tutorial 2- Always make a NOR/Nand dump using multiMAN or memdump before installing any CFW to have a recovery backup in case of any bricks. Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a way to recover (using hardware flashers) when you have a valid dump. ** A Hardware Flasher alone without a valid dump cannot fix your bricked PS3 ** 3- The QA flag must be always Enabled on your PS3 for safer upgrading/downgrading operations. Link ----> toggle_qa.pkg 4- Always use the Recovery Menu while installing this CFW to avoid possible bricks (XMB update works, but Recovery Menu is safer). 6- Please Check the MD5 of the downloaded PUP file before installing any CFW to avoid possible bricks. 7- DO NOT HAVE DISC IN PS3 WHEN UPDATING FIRMWARES..As the PS3 will take the UPDATE from the DISC First. 8- You need to already be on 3.55 to install this. Installing from any firmware other than 3.55 will simply not work - Downgrading back to 3.55 is always possible using the following steps : - Download the 4.25 downgrader PUP ---> 4.25 Downgrader Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db - Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USBPS3UPDATEPS3UPDAT.PUP" - While on Rogero CFW4.21, go to System Update from XMB and install the 4.25 downgrader CFW. - Once installed, now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USBPS3UPDATEPS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP - Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important) - Once the install is finished, you're now back on Rogero CFW3.55 v3.7 (from here it's better to dehash again before installing any other OFW/CFW 3.55) - Updating from CFW4.21 v1.00 to the CFW4.21 v1.09 should be done using the following steps : 1- Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 ) ---- Downgrade back to ver3.55 ---- Once on Rogero CEX3.55 v3.7 you can update again from Recovery Menu into the new CFW4.21 v1.09 2- Alternative Way ( CFW4.21 v1.00 --> Recovery Menu --> CFW4.21 v1.09 ) ---- You can try updating from CFW4.21 v1.00 to CFW4.21 v1.09 from Recovery Mode first. ---- If it didn't work, then you'll have to use the first Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 ) Credits to eussNL and the PS3DevWiki for the valuable and always up-to-date source of information. Credits to Deank for his continuous efforts on Multiman and many other PS3 tools/fixes. Source: Tortuga-Cove Quote Share this post Link to post Share on other sites
AquaFire 0 Posted October 22, 2012 Will i be able to install this cfw on my 4.11 ofw console If Lv1 checks are disable? Quote Share this post Link to post Share on other sites
themoddedshop31 0 Posted October 23, 2012 I think you might be able to upgrade not really sure on that thou Quote Share this post Link to post Share on other sites
S4BRE 5 Posted October 23, 2012 no you will need to be on 3.55 then update in recovery Quote Share this post Link to post Share on other sites
AquaFire 0 Posted October 23, 2012 no you will need to be on 3.55 then update in recoveryEven with the Lv1 checks disabled?Hmm well that sucks. Quote Share this post Link to post Share on other sites
Aut0botKilla 4 Posted October 27, 2012 Ok, well i was on mM 2.09 updated to 4.06.02, maybe didnt need to. But anyways. How do i do this: 2- Always make a NOR/Nand dump using multiMAN or memdump before installing any CFW to have a recovery backup in case of any bricks. On another note, before updating mM i could play ghost of sparta fine. now it just loads n goes to black screen. mar vs cap 2 boots fine. only games i have installed on hdd Quote Share this post Link to post Share on other sites
zambeezi 2 Posted October 29, 2012 Since I'm on 3.55 CFW Kmeaw at the moment, I assume that I can just do a straight upgrade... or do I have to be on a previous Rogero CFW? Quote Share this post Link to post Share on other sites
JPizzle 0 Posted October 29, 2012 Ok, well i was on mM 2.09 updated to 4.06.02, maybe didnt need to. But anyways. How do i do this: 2- Always make a NOR/Nand dump using multiMAN or memdump before installing any CFW to have a recovery backup in case of any bricks. On another note, before updating mM i could play ghost of sparta fine. now it just loads n goes to black screen. mar vs cap 2 boots fine. only games i have installed on hdd To dump NAND/NOR: mmOS->Select any file->Open in HEX viewer->[sELECT]->[sTART]->DUMP LV2(NO)->DUMP LV1(NO)->DUMP FLASH(YES)Since I'm on 3.55 CFW Kmeaw at the moment, I assume that I can just do a straight upgrade... or do I have to be on a previous Rogero CFW?you should be fine updating directly from Kmeaw Quote Share this post Link to post Share on other sites