steveo1978 0 Posted September 18, 2013 Extracting Disc11st) Click the "Browse" button and navigate to the place you would like the iso to be extracted to. I have noticed that sometimes this path does not get set correctly and files end up getting extracted somewhere else, so set the path then exit and re-open Exiso GUI. 2nd) Click the "Add an ISO" button and just load the ISO for GTA Disc1. 3rd) Click the "Go" button and let it run. The extraction time will vary depending on the amount of RAM in your PC and it best to not do anything until Exiso GUI has finished. Once its finished you will be notified by a pop-up just hit "OK" on that box and exit out of ExISO GUI.Using 360 Content Manager to install the needed files 1st) Click the settings button in Content Manager so that the proper settings can be applied.***For All of the following steps you will need FreeStyleDash (FSD) running with FTP enabled.***2nd) In Settings click the "FTP" tab3rd) Set the IP address to match the IP address that you are giving in FSD.4th) To verify that your IP is correct and able to connect to FSD click the "Test" button. If the test fails make sure Content Manager is not blocked by your PCs firewall and that FTP is enabled in FSD.5th) If you are install this to an internal HDD then you can skip this and move on to the 6th step. If you are using a USB Memory Unit type "USBMU0" (zero not an o at the end) with out quotes into the box. 6th) Click "Save" button7th) Navigate to the folder that contains the extracted ISO files you got from running ExISO GUI earlier8th) Right Click the folder 9th) Select "Load Files From Subfolders"10th) After the folder is scanned you should get 4 files listed under "Game Add-On" put a check mark beside the files like in the screenshot.11th) Click the button to FTP the selected files to the 360.12th) On this screen just click the "Upload" button. Its 7.69GB of files so it will take some time to FTP all the files to the 360. Once its finished you can exit out of 360 Content Manager. This is all that needed from Disc1 so there is no need to copy anything other then the 4 files you just FTPed to the 360. For Disc2 just treat that as a single disc game from here. There is no need to try and set it up as a multidisc game. There have been reports of GTA 5 having issues if ran from the same device as the installed content (Disc1 Content) so my suggestion is if you installed the disc1 content to a internal HDD then try to run disc2 content from an external HDD. Apps: ExISO GUI and 360 Content Manager These apps my need to be ran in Administrator Mode http://www.mediafire.com/?fk55d8zvg87aol1 Quote Share this post Link to post Share on other sites
Rorschach UK 1 Posted September 19, 2013 Accurate up to stage 10. I'm not getting 4 sub folders, I'm only getting 1Anyone got any ideas what's wrong please ? Quote Share this post Link to post Share on other sites
steveo1978 0 Posted September 19, 2013 Did you use ISO2GOD on the ISO for disc one? If you did thats your issue and you should use exiso GUI to extract the files from the ISO. Quote Share this post Link to post Share on other sites
Rocknrolla 0 Posted September 19, 2013 I get this error while trying. http://i1317.photobucket.com/albums/t624/marinbosnjak91/Untitled_zpsfe6770a0.jpg My ftp settings are alright, test was green light, i formated 16gb flash drive through "Storage=>Configure...", its plugged in xbox. Can someone help? Quote Share this post Link to post Share on other sites
steveo1978 0 Posted September 19, 2013 Rocknrolla arent you the one I helped on IRC that just needed to set the USBMU0 option? Quote Share this post Link to post Share on other sites
Rocknrolla 0 Posted September 19, 2013 Ye mate, I wrote this post before you helped me, forgot to report here that everything's working like a charm. Thanks once more! Quote Share this post Link to post Share on other sites
Rocknrolla 0 Posted September 21, 2013 Me again, this one doesn't regard GTA V, but it's similiar. I tried doing the same with Skyrim DLC-s, and I get this error. http://i1317.photobucket.com/albums/t624/marinbosnjak91/greska2_zpsb8fcb598.jpg I did everything same as with GTA V. Well, I transfered it with Horizon now though. Quote Share this post Link to post Share on other sites
steveo1978 0 Posted September 22, 2013 Make sure 360 IP address has not changed and that the device name is correct Quote Share this post Link to post Share on other sites
tvana 0 Posted September 27, 2013 Dit is allemaal nieuw voor mij en dankzij deze guide is het mij gelukt GTA V draaiende te krijgen. Disc1 op interne harde disk gezet volgens de stappen, Disc2 uitgepakt en manueel op de externe harde schijf gezet. Dus, puik werk! Thanks Quote Share this post Link to post Share on other sites
glyn123456 0 Posted November 27, 2014 fantastic tutorial worked great!!!!! Quote Share this post Link to post Share on other sites