CraftLourens 0 Posted November 26, 2013 WiFI CORONA 4 GB - WORKING!!! Quote Share this post Link to post Share on other sites
OrionDats 0 Posted November 28, 2013 Today I am going to show you just how easy it is to update your JTAG/RGH Xbox 360 game console with XeBuild's new built in updater. Thank you to the team behind XeBuild for your ongoing support of the xbox console and for always keeping us up to date, without you there would be no xbox 360 scene. I encourage everyone to send a small donation to the XeBuild team at donations@realmodscene.com First thing you need to do is download XeBuild, Dashlaunch, 16537 and the common packages posted at the bottom of this page. Extract the Dashlaunch package and in the extracted folder you will see a folder named 'Installer', move this folder and the default.xex it contains over to your xbox 360 HDD, USB or internal memory (anywhere you can access it using your F3 Filemanager). Navigate to the default.xex in the installer folder on your xbox console and run the it. This is the dashlaunch installer, it will prompt you to update as soon as it is launch as the version of dashlaunch on your console is older then the version you are running. Follow the onscreen prompts and it will install dashlaunch and shut down the console. Turn the console back on and load the dashlaunch installer default.xex again. You will be greeted with the Current Options screen, go down to the last option in the list 'Configurator' and click A to expand the menu. The 3rd option down will be 'updserv' and it will be disabled, enable it and leave dashlaunch running on your console. Now go back to your computer and extract the XeBuild and common packages, take the 111 files from the common package and copy them into the 'common' folder from the extracted XeBuild package. Extract the 16537 package and place the '$Systemupdate' folder you get from it in the XeBuild 16537 folder. Back out of the 16537 folder so you are now in the XeBuild folder, make sure no files or folders are highlighted or selected. Hold shift on your keyboard and right click in an empty part of the folder being sure not to click on any of the files or folders and you will see an option in the right click menu that says 'open command window here', click it. You have now been greeted with a beautiful command prompt window already in the XeBuild folder just waiting for you to tell it what to do. Type in the following command xebuild update -f 16537 Press enter and stand back and watch XeBuild work it's magic! XeBuild will now read your NAND, create an updated freeBOOT image for your, flash it to your NAND and then apply the Avatar and Kinect data to your console. When it is done the console will reboot and you will be in the updated stock dashboard once the console loads up. Now wasn't that easy? Thank you XeBuild! I encourage everyone to send a small donation to the XeBuild team at donations@realmodscene.com do I need to have internet to connect to the 360 . it gave me an fatal error. can't find xbox Quote Share this post Link to post Share on other sites
ivo_g 1 Posted December 1, 2013 Updated successfully although I have to say I ended doing it via Wireless as it was not able to find my console via Wired: xeBuild v1.09.639------------------------------------------------------------------- { Update Mode } ----started, watching network for xbox...UDP wait timeout!failed to find xbox beacon ***** FATAL UPDATE ERROR: unable to find console! --------------------------------------------------------------- xeBuild Finished. Have a nice day.--------------------------------------------------------------- press <enter> to quit... Thank you for this tutorial. Quote Share this post Link to post Share on other sites
ivo_g 1 Posted December 1, 2013 will my hdd get flashed after updating ? and my original dashboard will be replaced by another fsd3 or whatever ? No, no Hdd data was lost by my update, no new fsd3 as well. Quote Share this post Link to post Share on other sites
ricardobdc 0 Posted December 4, 2013 C:UsersRicardinhoDesktopxeBuild_1.09>xebuild update -f 16537 --------------------------------------------------------------- xeBuild v1.09.639 --------------------------------------------------------------- ---- { Update Mode } ---- started, watching network for xbox...success, found xbox beacon at 192.168.1.100 connected to Corona with updsvr version 2 (peek version 2) addon patch from console: nofcrt **** could not read cf_16537.bin (-1) **** ******* ERROR: critical bootloader files are missing, cannot proceed! ***** FATAL UPDATE ERROR: -1 unable to complete NAND image --------------------------------------------------------------- xeBuild Finished. Have a nice day. --------------------------------------------------------------- press <enter> to quit... Quote Share this post Link to post Share on other sites
datastream 101 Posted December 4, 2013 read the tut again and then read it again, make sure you have extracted all the files in the correct folders... Quote Share this post Link to post Share on other sites
super194 0 Posted December 13, 2013 this is amazing thank you xebulld Quote Share this post Link to post Share on other sites
Carpender 0 Posted December 14, 2013 Love this!!! Can't wait for 16547 Quote Share this post Link to post Share on other sites
CandYmaN 0 Posted December 14, 2013 Love this!!! Can't wait for 16547 +1000 Quote Share this post Link to post Share on other sites
Cornelio Fehr 0 Posted December 19, 2013 Would there happen to be a command for the update mode that just creates a backup of my nand? I have already updated to 16537 but I want a backup of my full nand Quote Share this post Link to post Share on other sites
ToriBox 0 Posted December 20, 2013 Tried to update from 16203 to 16537 but get the following error when building NAND. Tried 2 different methods: 1. When following the tut get ximedic.exe error. 2. With XeBuild GUI V2.091 gives error listing shoen below. Can someone tell me if this will be a problem when I try to update the console? --------------------------------------------------------------- xeBuild v1.09.639---------------------------------------------------------------base path changed to J:xeBuild_GUI_2.091files---- { Image Build Mode } ----building glitch image***** WARNING: nanddump.bin has a bad LBA at block 0x365 (raw offset 0xe00a00), block LBA ignored******WARNING: 'ximedic.xex' crc32: 0xa58bc2c0 expected: 0x1d992bfb---------------------------------------------------------------output.bin image built, info:---------------------------------------------------------------Kernel : 2.0.16537.0Console : TrinityNAND size : 16MiBBuild : GlitchXell : power on console with console eject buttonSerial : ################ConsoleId : ################MoboSerial: ################Mfg Date : 09/25/2010CPU Key : ################1BL Key : ################DVD Key : ################CF LDV : 4KV type : type2 (hashed - unchecked, master key not available)--------------------------------------------------------------- xeBuild Finished. Have a nice day.--------------------------------------------------------------- Quote Share this post Link to post Share on other sites
reec0X 0 Posted December 31, 2013 Guys....below is my details.....on my xbox 360 slim 4gb jtag -------------------------------------------------- Freestyle 3 Dash Version: 3.0 Rev58 Kernel version: 2.0.16537.0 Skin Name: Default.x zp Skin Version: 3.0 Rev63 ----------------------------------------------- My question is ---> what should I update if I have this configuration? dashlaunch? xex? latest F3? My update is more prefer on offline installing rather than going online... Thanks! Quote Share this post Link to post Share on other sites
JPizzle 0 Posted December 31, 2013 Guys....below is my details.....on my xbox 360 slim 4gb jtag--------------------------------------------------Freestyle 3Dash Version: 3.0 Rev58Kernel version: 2.0.16537.0Skin Name: Default.x zpSkin Version: 3.0 Rev63-----------------------------------------------My question is ---> what should I update if I have this configuration? dashlaunch? xex? latest F3?My update is more prefer on offline installing rather than going online...Thanks!Update F3 Quote Share this post Link to post Share on other sites
gregormnb 0 Posted January 2, 2014 What can I do? ****could not read cf_16537.bin (-1) ****** ***** ERROR : critical bootloader files are missing, canno proceed! **** Fatal update error: unable to complete NAND image ***** Please, help! Quote Share this post Link to post Share on other sites
Swizzy 2081 Posted January 2, 2014 What can I do? ****could not read cf_16537.bin (-1) *********** ERROR : critical bootloader files are missing, canno proceed!**** Fatal update error: unable to complete NAND image ***** Please, help!Download the System update and put it in the 16537 folder... (the su file is what you need to build the nand)the easiest way is to just grab xeBuild GUI and use the xebuild included with it Quote Share this post Link to post Share on other sites
xzanox 3 Posted January 4, 2014 Had done quite a few updates this way on rgh systems without any errors. Today i had a customers falcon dash 14699 rgh1 which gave me the hv patches update error. I removed fsd (old version), installed new one, installed newest dashlaunch and enabled updsrvr. Ran this command in xebuild 1.08 map: xebuild.exe client -p and it updated the hv patches! SO MANY THANKS TO THE MEMBER WHO POSTED THIS EARLIER IN THIS THREAD!! After that i shut down the xbox, restarted, launched dashlaunch (through installer) to enable updsvr again and gave the command: xebuild update -f 16537 and it updated like all the times before. Thanks everyone who took the time to answer this questions with their great information. Don't think (or see a way) that i could have accomplished the hv patches update through Jrunner, but enlighten me if it would have been possible too. Jrunner kept giving me the same error whilst updating, but this xebuild.exe client -p command saved the day! cheers. Quote Share this post Link to post Share on other sites
-=HellFire=- 0 Posted January 12, 2014 Im having a bit of trouble getting a valid ip on my xbox, it gives me 169.254.149.194 which will not let me connect to xeBuild.xeBuild only gives me: FATAL UPDATE ERROR: unable to find console!If anyone can give me an idea as to what the problem might be please let me know. Thanks Quote Share this post Link to post Share on other sites
Swizzy 2081 Posted January 12, 2014 Im having a bit of trouble getting a valid ip on my xbox, it gives me 169.254.149.194 which will not let me connect to xeBuild.xeBuild only gives me: FATAL UPDATE ERROR: unable to find console!If anyone can give me an idea as to what the problem might be please let me know.ThanksCheck your router settings, that IP looks like it's a public one, you need to be in a local area network... Quote Share this post Link to post Share on other sites
-=HellFire=- 0 Posted January 12, 2014 Thank you Swizzy, it was a networking issue which I have now resolved. But now I am getting the same error as gregormnb: *** could not read cf_1653.bin (-1) *** ******* ERROR: critical bootloader files are missing, cannot proceed! ***** FATAL UPDATE ERROR: -1 unable to complete NAND image Im not sure where to get the exBuild GUI from, is it the file that was included in the first post exBuild_1.09.zip?Sorry for the noob questions but I am new to all this. Thanks again. Quote Share this post Link to post Share on other sites
Swizzy 2081 Posted January 12, 2014 Im not sure where to get the exBuild GUI from http://homebrew-connection.org/files/xbox/nand_builder/xeBuild_GUI/dl_xeBuild_GUI_2.091.rarfor the latest version (when i release new ones) you can always find them here: http://homebrew-connection.org/files/xbox/nand_builder/xeBuild_GUI/ Quote Share this post Link to post Share on other sites
-=HellFire=- 0 Posted January 13, 2014 Thanks a million Swizzy! I got it all working like a charm now. I appreciate all your help. Quote Share this post Link to post Share on other sites
xceqter 0 Posted February 8, 2014 rgh corona 4gb update to 16547 via wifi success...thanks for the guide Quote Share this post Link to post Share on other sites
wickie68 0 Posted February 8, 2014 Good and easy tutorial! Worked great!! Quote Share this post Link to post Share on other sites
mironj 3 Posted February 19, 2014 JPizzzle will you marry me? LOL It works like a charm! Even a retard monkey can do this! Thanks a million! Quote Share this post Link to post Share on other sites
