coorva 10 Posted August 19, 2013 has anyone heard of this?? i read somewhere you have to brick your system first but i really dont think thats a good idea,,would be nice as i reballed 2 of them and they have no drives,,would like to marry one in both of these,, Quote Share this post Link to post Share on other sites
moses_373 151 Posted August 20, 2013 I think E3 made a little dongle that could downgrade from a limited set of dashboards. I was researching it a while back but now I forget the particulars. Quote Share this post Link to post Share on other sites
coorva 10 Posted August 23, 2013 yea i never heard anything about this lii do some of my own,, Quote Share this post Link to post Share on other sites
baileyscream 0 Posted January 27, 2014 no you don't brick it. that's stupid !! you run minvercheck as an update in the xmb if your console will go to or below 3.55 then you need a flasher if slim then you can use a progskeet or E3 flasher or TEENSY++ if you have a phat that is CECHG or below (the 5th letter between A-G) then you have a nand console so use progskeet or TEENSY++ if you have a phat CECHH or above then you can use a progskeet or E3 flasher or TEENSY++ you make a dump validate it patch it for 3.55 (or the latest cfw eg 4.53cfw) flash it back install rogero3.55 in fsm (or if you patched for the latest cfw then install the cfw in recovery menu) qa dehash (skip if you patched for the latest cfw) install any cfw / ofw you want if your console is 3.56 min then patch for the latest cfw ONLY in the patch step above Quote Share this post Link to post Share on other sites