croize 36 Posted May 7, 2013 Hi , What is average temprature for this motherboard ? Im on 47 - 49 atm ( 100 % fan ) , Since its wery hot outside ... When do i get in riskzone ? Quote Share this post Link to post Share on other sites
BL4K3Y 96 Posted May 7, 2013 My Trinity unit never exceeds 55 degrees C with the fan set to 75% (this is during heavy gameplay - I saw temperatures at their highest when I was playing Crysis 3). I've increased the fan speed slightly because it often gets quite warm in my bedroom where the console is. Alternatively, you can set temperature thresholds in DashLaunch, the SMC Config or with XeBuild before building your image. Quote Share this post Link to post Share on other sites
croize 36 Posted May 7, 2013 But if i set it to 100 % in dashlaunch , Isnt that same as setting it 100 % in fsd : s ? Thats why i never been setting it ..... Quote Share this post Link to post Share on other sites
irishdave 235 Posted May 7, 2013 your xbox will shut down if it gets too hot so dont worry Quote Share this post Link to post Share on other sites
Prayer 49 Posted May 7, 2013 Just keep it in a well ventilated space and you won't have a problem. Quote Share this post Link to post Share on other sites
croize 36 Posted May 7, 2013 i got it on my floor in my room open space on floor so Quote Share this post Link to post Share on other sites
Prayer 49 Posted May 7, 2013 100% is way too much for a slim console. I keep mine at 45% and the highest temperature I've got was 62°c. The temperature outside is like 25 - 28 °c maybe. So I'd say it's pretty warm here too. As I said there is no need for such a high speed percentage cause the new slim models are made to withstand high temperatures. In case it gets too hot the console will shut itself down. Quote Share this post Link to post Share on other sites
croize 36 Posted May 7, 2013 So you say , Even if my console is this warm , That i should put it on 45 % ? even if numbers reach 55c? , 62 c on cpu , gpu , mem O.O ? Quote Share this post Link to post Share on other sites
croize 36 Posted May 7, 2013 i put 75 % to start with aslong my meter keeps itself out of red i guess im fine , will try mw3 some with this fan speed on to test , thanks m8.s : ) Quote Share this post Link to post Share on other sites
Prayer 49 Posted May 7, 2013 So you say , Even if my console is this warm , That i should put it on 45 % ? even if numbers reach 55c? , 62 c on cpu , gpu , mem O.O ?Cpu only Quote Share this post Link to post Share on other sites
croize 36 Posted May 7, 2013 Doesnt look like 75 % / 100 % is much diffrent , Its like 2-5 degress more then 100 % , Will play a little more, Then i put it lower so i dont think a jetplan coming 24/7 Quote Share this post Link to post Share on other sites
rst123 2 Posted May 10, 2013 I get 70-72 C in CPU, GPU and memory. I have not changed any fan settings yet. Do I need to fiddle with them? Quote Share this post Link to post Share on other sites
Prayer 49 Posted May 10, 2013 You should because summer is coming and it's gonna get hot. Quote Share this post Link to post Share on other sites
rst123 2 Posted May 10, 2013 You should because summer is coming and it's gonna get hot. What fan setting s should I use? Quote Share this post Link to post Share on other sites
Prayer 49 Posted May 10, 2013 You should because summer is coming and it's gonna get hot.What fan setting s should I use?45-50% depending on how well ventilated your room is. Quote Share this post Link to post Share on other sites
JohnWestBear 2 Posted May 14, 2013 Mine is just automatically set to enable fans when the temperature starts to creep up above 45 degrees. My actual temp is always around 44-48 degrees. That's with a repaste and heatsinks clean up as well. I'm using AS5 incase anyone was interested. Quote Share this post Link to post Share on other sites
coorva 10 Posted May 14, 2013 I don't have to worry about overheating or fans speeds sounds here Quote Share this post Link to post Share on other sites
Prayer 49 Posted May 14, 2013 Wish I had one of those! Looks awesome! Quote Share this post Link to post Share on other sites