Jump to content
RealModScene
Octal450

J-Runner with Extras (17559) - Built in Timings, Bugfixes, and New Features!

Recommended Posts

Hi,

LATEST VERSION: V3.3.0 r3 - 1/3/2024

Based on there being some interest I decide to post my J-Runner with Extras here to provide for y'all.

Core Features:
- Fully working in Windows Vista, 7, 8.x, 10, and 11! No more crashing!
- 17559 Dashboard, 3.21 Dashlaunch, and 1.21 XeBuild support
- Native FTDI Support (xFlasher and squirt)
- SMC+ Support (Super fast glitch cycles without false success resets)
- RGH3 Support
- XL HDD/USB Support
- Updated Program Timing File menu
- Easy Donor Nand Creator
- Cleanup the UI in general, loads of usability and quality of life improvements
Loads of various bugfixes all over the place, rewritten code for a more stable experience
- AND LOTS MORE!

System Requirements:
- x86 based Windows PC (i386 or amd64)
- Windows Vista SP2 or later
- dotNET Framework 4.5.2
- USB 2.0 port for hardware devices

Screenshot:
image.png.e96c1f886287a85dc8ce29be4bfd35ff.png

Download Release

Kind Regards,
Josh

  • Like 11
  • Thanks 10
  • Haha 1
  • Sad 1

Share this post


Link to post
Share on other sites

Absolutely my pleasure! Let me know if there is anything you'd like to see added!

Kind Regards,
Josh

Share this post


Link to post
Share on other sites
On 11/22/2020 at 4:20 AM, Octal450 said:

Absolutely my pleasure! Let me know if there is anything you'd like to see added!

Kind Regards,
Josh

Any chance of bigffs check box for jasper and trinity ? 

Good to see you active here mate. See you on discord and youtube alot 

Share this post


Link to post
Share on other sites

I can look into it!

I've never been much of a forums guy but starting to get into it :)

Kind Regards,
Josh

Share this post


Link to post
Share on other sites

New J-Runner live.

Changelog:

V2.9.5:
- Added: Matrix Flasher Mode to support the MTX USB NAND Flasher
- Added: XSVF support for Matrix Flasher
- Added: New dualnand timings to Program Glitch Chip menu (NEW! These timings I just compile last night, https://www.youtube.com/watch?v=PnQCnng_oNM)
- Fixed: Matrix Flasher can't write
- Fixed: Various bugs and usability issues

Download in OP

Kind Regards,
Josh

Share this post


Link to post
Share on other sites
On 11/27/2020 at 10:53 AM, ianboy1987 said:

Any chance of bigffs check box for jasper and trinity ? 

Good to see you active here mate. See you on discord and youtube alot 

It will be added in next release, already working we are just testing/improving more then it'll be uploaded.

Josh

Share this post


Link to post
Share on other sites

New J-Runner live.

Changelog:

Edit Jan 22:
V2.9.6c:
- Added: Newest Corona S-RGH timing files
- Improved: Timing Assistant

V2.9.6b:
- Fixed: JTAG SMC copy bug 

V2.9.6:
- Added: DEVGL Build Support (doesn't include any keys, find them yourself)
- Added: Bigffs Build Support
- Fixed: Various bugs and usability issues
- Changed: Updated GUI for cleaner layout of controls
- Changed: Totally redone Timing Assistant\

Kind Regards,
Josh

Share this post


Link to post
Share on other sites

No, its not devkit images. If you don't know what it is then disregard it. You need keys that aren't included for it anyways.

Bigffs extends the system partition to 32MB on big block boards (jasper or trinity or corona)

Kind Regards,
Josh

Share this post


Link to post
Share on other sites
3 hours ago, Octal450 said:

Bigffs extends the system partition to 32MB on big block boards (jasper or trinity or corona)

What is the use of extended system partition

Share this post


Link to post
Share on other sites

Quick bugfix:

Today while working on a JTAG Jasper, I noticed that the old J-Runner devs left a bug in the way XeBuild is handled for JTAG boxes...
now fixed in 2.9.6b. Just replace J-Runner.exe, and if you haven't grabbed 2.9.6 yet, this fix is included in the above zip links.

V2.9.6b:
- Fixed: JTAG SMC copy bug

Kind Regards,
Josh

Share this post


Link to post
Share on other sites

Non critical update, improved Corona S-RGH timings with more compiled files + fixed. Also, improved Timing Assistant. Same links as above.

V2.9.6c:
- Added: Newest Corona S-RGH timing files
- Improved: Timing Assistant

Kind Regards,
Josh

Share this post


Link to post
Share on other sites

V2.9.7:
- Added: Add Matrix Flasher reprogramming
- Fixed: Various bugs and usability issues

Now you can program the Matrix Flasher to flash X360ACE, or Matrix/Coolrunner, or backup the existing firmware directly from the Tools menu. Remember, Matrix Flasher Mode will allow you to program XSVF and such with a modified Matrix Flasher.

Kind Regards,
Josh

  • Like 2

Share this post


Link to post
Share on other sites

Nice to see you on realmodscene Josh!  I love your work, your upgrades to J-runner are now essential for any modder/installer.

  • Like 1

Share this post


Link to post
Share on other sites
On 1/2/2021 at 8:23 PM, Octal450 said:

No, its not devkit images. If you don't know what it is then disregard it. You need keys that aren't included for it anyways.

Bigffs extends the system partition to 32MB on big block boards (jasper or trinity or corona)

Kind Regards,
Josh

Thanks man much appreciated 

  • Like 1

Share this post


Link to post
Share on other sites

Updated the original Nand on a Trinity with Demon and Xecuter CR3 Pro to 17559 from Xbox Live, from 16xxx something, after that the console didn`t glitch anymore.

Flashed the Demon Nand to 17559 with J-Runner 2.9.7, unfortunately I also used the feature ”Glitch chip - Program Timing File”. Something tells me this was not a good thing to do with a Xecuter CR3 Pro chip? I assume this is equal to ”Program Coolrunner” in other J-Runner releases?

Is it bricked or is it possible to restore the CR3 to factory firmware?

Share this post


Link to post
Share on other sites

If you flashed the Xecuter CR3 PRO, you need to reconfigure the DIPS. Sorry, I have no expirience with S-RGH on that chips, so I don't know what the DIPS should be. Maybe all off.

"I assume this is equal to ”Program Coolrunner” in other J-Runner releases?"
Yes, except mine uses the latest timing files available, not the outdated methods.

Kind Regards,
Josh

Share this post


Link to post
Share on other sites

Thanks for the input. I think I don’t have S-RGH (DGX?), I`ve the Coolrunner 3 Pro, with DIPS, so the question is if it`s possible to get a timing file for that glitch chip and reprogram it?

Unfortunately seems the Team Xecuter site and Forums down where it might be possibly to get the files, maybe down for good?

Share this post


Link to post
Share on other sites

Hello.
I can't write ECC using MTX SPI NAND Flasher V1.0.
When I do Write ECC, the nand pro window opens and then closes immediately.
Checking Matrix Flasher Mode.

I was able to write ECC using another JRunner
I think it is due to J-Runner with Extras 2.9.7 (unofficial).

Since updflash.bin was copied to usb stick and written with Xell
The remodeling is successful.
I like J-Runner with Extras
Please respond so that it can be used.

My environment
xbox360:Corona v3
OS:Windows10 64bit and Windows7 64bit

Share this post


Link to post
Share on other sites
On 2/6/2021 at 11:07 AM, jakke said:

is if it`s possible to get a timing file for that glitch chip and reprogram it?

Sorry, I never heard of Xecuter ever releasing files for that, I also haven't touched a CR3Pro, so I can't help you with that.

20 hours ago, gonza3 said:

When I do Write ECC, the nand pro window opens and then closes immediately.

That's strange, I will go double check this. Which drivers were you using?

Kind Regards,
Josh

Share this post


Link to post
Share on other sites

I installed the driver below
Nand&CoolRunner_Flasher_USB_v1.1/XSVF/LIBUSB_DRIVER

When I think about it now, I was able to write it last time, so maybe the power cable connection was bad.
I would like to confirm it the next time I use it.

P.S.
When I newly wrote ECC to Falcon, it was able to write normally, so I think that the cause was a poor connection of the power cable.
J-Runner seems to have no problem.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...