Octal450 6 Posted November 21, 2020 Hi, Based on there being some interest I decide to post my J-Runner with Extras here to provide for y'all. This is the continued development of the PhenomMod J-Runner. So what has it? - 17559 Dashboard, 3.21 Dashlaunch, and 1.21 XeBuild support - SMC+ Support (Super fast glitch cycles without false success resets! See demo: https://www.youtube.com/watch?v=FKGIoVQN_1I) - Fixed the SMC deletion bug - J-Runner no longer leaves SMCs it puts in your data folder - Added 6717 and 9199 Dash Support for JTAG, GLITCH, GLITCH2, R-JTAG (THX @SGCSam!) (Supported motherboards only) - RGH1.2, S-RGH, R-JTOP timings added to Program Glitch Chip menu (see picture) - Timing Assistant - Tweaked XeLL RELOADED: ----- Displays Console LDV ----- Displays Motherboard type ----- Displays serial number for console and board (board S/N CANT EVER CHANGE) (prevent scams) ----- Fixed USB refresh bug - Discord RPC (Disableable in Settings) - Extra SMCs/files - MFR Date displayed in KV Info - Other Misc Fixes such as: ----- Fixed the R-JTAG box showing up when it shouldn't ----- Fixed crashing issues on Windows 10 - Cleanup the UI in general, loads of usability and quality of life improvements - Proper MTX USB Support with NandPro and Xsvf_Ace, can program glitch chips - Thanks Mena! - Ability to reprogram MTX USB Flasher with ACE or Coolrunner/Matrix HEX files - DEVGL Build Support (doesn't include any keys, find them yourself) - Bigffs Build Support Screenshots: Download 2.9.7: https://cdn.octalsconsoleshop.com/J-Runner with Extras.zip VirusTotal 2.9.7: https://www.virustotal.com/gui/file/470940ea9655952c58ae637daf39f6961472f7d95598a83c1d3e02ec94d43f58/detection Kind Regards, Josh 2 2 1 1 Quote Share this post Link to post Share on other sites
slayer087 2 Posted November 22, 2020 wow! Thanks for this Josh! Quote Share this post Link to post Share on other sites
Octal450 6 Posted November 22, 2020 Absolutely my pleasure! Let me know if there is anything you'd like to see added! Kind Regards, Josh Quote Share this post Link to post Share on other sites
ianboy1987 42 Posted November 27, 2020 On 11/22/2020 at 4:20 AM, Octal450 said: Absolutely my pleasure! Let me know if there is anything you'd like to see added! Kind Regards, Josh Any chance of bigffs check box for jasper and trinity ? Good to see you active here mate. See you on discord and youtube alot Quote Share this post Link to post Share on other sites
Octal450 6 Posted November 29, 2020 I can look into it! I've never been much of a forums guy but starting to get into it :) Kind Regards, Josh Quote Share this post Link to post Share on other sites
Octal450 6 Posted December 10, 2020 New J-Runner live. Changelog: V2.9.5: - Added: Matrix Flasher Mode to support the MTX USB NAND Flasher - Added: XSVF support for Matrix Flasher - Added: New dualnand timings to Program Glitch Chip menu (NEW! These timings I just compile last night, https://www.youtube.com/watch?v=PnQCnng_oNM) - Fixed: Matrix Flasher can't write - Fixed: Various bugs and usability issues Download Full Pack: https://cdn.octalsconsoleshop.com/J-Runner with Extras.zip Kind Regards, Josh Quote Share this post Link to post Share on other sites
Octal450 6 Posted December 29, 2020 On 11/27/2020 at 10:53 AM, ianboy1987 said: Any chance of bigffs check box for jasper and trinity ? Good to see you active here mate. See you on discord and youtube alot It will be added in next release, already working we are just testing/improving more then it'll be uploaded. Josh Quote Share this post Link to post Share on other sites
Octal450 6 Posted January 1 New J-Runner live. Changelog: Edit Jan 22: V2.9.6c: - Added: Newest Corona S-RGH timing files - Improved: Timing Assistant V2.9.6b: - Fixed: JTAG SMC copy bug V2.9.6: - Added: DEVGL Build Support (doesn't include any keys, find them yourself) - Added: Bigffs Build Support - Fixed: Various bugs and usability issues - Changed: Updated GUI for cleaner layout of controls - Changed: Totally redone Timing Assistant Download Full Pack: https://cdn.octalsconsoleshop.com/J-Runner with Extras.zip Download 2.9.5 to 2.9.6c Delta Update: https://cdn.octalsconsoleshop.com/JR-295-296-Delta-Update.zip VirusTotal 2.9.6c: https://www.virustotal.com/gui/file/a0690adbef481b34d194c7b610addd245c9f9fd396b0f83e79055079525dd4be/detection Kind Regards, Josh Quote Share this post Link to post Share on other sites
Drewmorama 0 Posted January 2 What is DEVGL mean? Does it mean TX Demon? What is Bigffs? Does it mean Jasper BB? Quote Share this post Link to post Share on other sites
BethFoster5841 0 Posted January 2 DEVGL is for building devkit images afaik Quote Share this post Link to post Share on other sites
Octal450 6 Posted January 2 No, its not devkit images. If you don't know what it is then disregard it. You need keys that aren't included for it anyways. Bigffs extends the system partition to 32MB on big block boards (jasper or trinity or corona) Kind Regards, Josh Quote Share this post Link to post Share on other sites
djmaj0 0 Posted January 3 3 hours ago, Octal450 said: Bigffs extends the system partition to 32MB on big block boards (jasper or trinity or corona) What is the use of extended system partition Quote Share this post Link to post Share on other sites
Octal450 6 Posted January 4 If you needed it, bigger bootanim.xex is one reason I saw it used recently. Josh Quote Share this post Link to post Share on other sites
Octal450 6 Posted January 6 Quick bugfix: Today while working on a JTAG Jasper, I noticed that the old J-Runner devs left a bug in the way XeBuild is handled for JTAG boxes... now fixed in 2.9.6b. Just replace J-Runner.exe, and if you haven't grabbed 2.9.6 yet, this fix is included in the above zip links. V2.9.6b: - Fixed: JTAG SMC copy bug Kind Regards, Josh Quote Share this post Link to post Share on other sites
Octal450 6 Posted January 22 Non critical update, improved Corona S-RGH timings with more compiled files + fixed. Also, improved Timing Assistant. Same links as above. V2.9.6c: - Added: Newest Corona S-RGH timing files - Improved: Timing Assistant Kind Regards, Josh Quote Share this post Link to post Share on other sites
Octal450 6 Posted January 24 V2.9.7: - Added: Add Matrix Flasher reprogramming - Fixed: Various bugs and usability issues Now you can program the Matrix Flasher to flash X360ACE, or Matrix/Coolrunner, or backup the existing firmware directly from the Tools menu. Remember, Matrix Flasher Mode will allow you to program XSVF and such with a modified Matrix Flasher. Download Full Pack: https://cdn.octalsconsoleshop.com/J-Runner with Extras.zip Download 2.9.6 to 2.9.7 Delta Update: https://cdn.octalsconsoleshop.com/JR-296-297-Delta-Update.zip VirusTotal: https://www.virustotal.com/gui/file/470940ea9655952c58ae637daf39f6961472f7d95598a83c1d3e02ec94d43f58/detection Kind Regards, Josh 2 Quote Share this post Link to post Share on other sites
moses_373 149 Posted January 25 Nice to see you on realmodscene Josh! I love your work, your upgrades to J-runner are now essential for any modder/installer. 1 Quote Share this post Link to post Share on other sites
ianboy1987 42 Posted January 27 On 1/2/2021 at 8:23 PM, Octal450 said: No, its not devkit images. If you don't know what it is then disregard it. You need keys that aren't included for it anyways. Bigffs extends the system partition to 32MB on big block boards (jasper or trinity or corona) Kind Regards, Josh Thanks man much appreciated 1 Quote Share this post Link to post Share on other sites
jakke 0 Posted February 3 Updated the original Nand on a Trinity with Demon and Xecuter CR3 Pro to 17559 from Xbox Live, from 16xxx something, after that the console didn`t glitch anymore. Flashed the Demon Nand to 17559 with J-Runner 2.9.7, unfortunately I also used the feature ”Glitch chip - Program Timing File”. Something tells me this was not a good thing to do with a Xecuter CR3 Pro chip? I assume this is equal to ”Program Coolrunner” in other J-Runner releases? Is it bricked or is it possible to restore the CR3 to factory firmware? Quote Share this post Link to post Share on other sites
Octal450 6 Posted February 4 If you flashed the Xecuter CR3 PRO, you need to reconfigure the DIPS. Sorry, I have no expirience with S-RGH on that chips, so I don't know what the DIPS should be. Maybe all off. "I assume this is equal to ”Program Coolrunner” in other J-Runner releases?" Yes, except mine uses the latest timing files available, not the outdated methods. Kind Regards, Josh Quote Share this post Link to post Share on other sites
jakke 0 Posted February 6 Thanks for the input. I think I don’t have S-RGH (DGX?), I`ve the Coolrunner 3 Pro, with DIPS, so the question is if it`s possible to get a timing file for that glitch chip and reprogram it? Unfortunately seems the Team Xecuter site and Forums down where it might be possibly to get the files, maybe down for good? Quote Share this post Link to post Share on other sites
gonza3 0 Posted February 8 Hello. I can't write ECC using MTX SPI NAND Flasher V1.0. When I do Write ECC, the nand pro window opens and then closes immediately. Checking Matrix Flasher Mode. I was able to write ECC using another JRunner I think it is due to J-Runner with Extras 2.9.7 (unofficial). Since updflash.bin was copied to usb stick and written with Xell The remodeling is successful. I like J-Runner with Extras Please respond so that it can be used. My environment xbox360:Corona v3 OS:Windows10 64bit and Windows7 64bit Quote Share this post Link to post Share on other sites
Octal450 6 Posted February 9 On 2/6/2021 at 11:07 AM, jakke said: is if it`s possible to get a timing file for that glitch chip and reprogram it? Sorry, I never heard of Xecuter ever releasing files for that, I also haven't touched a CR3Pro, so I can't help you with that. 20 hours ago, gonza3 said: When I do Write ECC, the nand pro window opens and then closes immediately. That's strange, I will go double check this. Which drivers were you using? Kind Regards, Josh Quote Share this post Link to post Share on other sites
gonza3 0 Posted February 9 I installed the driver below Nand&CoolRunner_Flasher_USB_v1.1/XSVF/LIBUSB_DRIVER When I think about it now, I was able to write it last time, so maybe the power cable connection was bad. I would like to confirm it the next time I use it. P.S. When I newly wrote ECC to Falcon, it was able to write normally, so I think that the cause was a poor connection of the power cable. J-Runner seems to have no problem. Quote Share this post Link to post Share on other sites
