Search the Community

So I bought a Trinity with dash 17489. I installed the qsb and cr4xl and read the nand 4 times. Copied em and put in a different folder. Selected glitch2 then cr4x, created ecc then loaded ecc in the source. Then write. Disconnected j-runner v2 programmer. The console boots fine. Solid green light on front. Cr4xl has a green light that is solid but flashes of every 4 to 6 seconds. When it flashes off it sounds like the fan is winding down for a split second. After playing with dip switches for HOURS! and slim to phat switch. And the post bit setting from default to 10ohm to 100ohms. Still no luck. Exact results So I took the original nand and wrote it back to the console and the console boots up fine. Tried again to create a new ecc after dumping again and the comparison is the same. Wrote it to the console. And I get the same results. Resoldered my points and cleaned with 99% alcohol and still no flipping luck. Any ideas? O yea, btw my cpu is connected to the Internet and I did add the dash 17489 and let everything fully download. Trying to get xell to boot so i can retrieve the cpu key. Not sure what I'm doing wrong. I would greatly appreciate your help!!!!!!!