Search the Community
Showing results for tags 'corona 4gb'.
Found 2 results
Hi, I have a Corona V4 that I want to dump nand. The problem is that it does not detect the sd devic-nand dumper (manufactured from the diagram of sd nand dumper). I soldered the contacts of the sd card reader directly to the wires. I did not use the sd card and check continuity between the sd card points and the sd card reader pcb points to solder the correct wires. The crystal is groundede to video output chassis (gnd) 4-6 pads next to nand are not bridged. I have connected the gnd point of the nand dumper with the pad number 6 Resistors rcs6 and 7 are bridged (the pads, because they had no resistance) I leave images of the installation. 1- https://ibb.co/m9wPJm72- https://ibb.co/p26w9j63- https://ibb.co/JcZ3RQy Any help? Thanks very much and sorry for my poor english
I have recently modded my first Corona. It was the 4gb v6. I am not having issues with booting, it works on first to second glitch every time. My issue is when the reset gets a pulse from the ACE chip, the xbox makes a high pitched sound like an old tube TV. I don't know if this is normal of the Corona, or if my reset wire may be hitting another contact. I just know I don't like high pitched sounds coming from my electronics, never been a good thing.