royale.am

Please can you also update the italian translation? It is mentioned in the changelog but there isn't the translation file inside the archive

last update: After converting the corona 4gb to 16mb one, I had flash config 0x00000000...tried nand reset (i/o short), double checked every swapped component but always same flash config...then I checked R2C10, no value on tester, just as opened pads; after shorting it I was able to flash the nand, now everything is working like a charm. I don't think I had the first eMMC problem because of R2C10 and now I don't want to come back to eMMC only to check this maybe someone could tell more about this. Thank you Swizzy for your help, hope someone will find this post useful to solve his problem.

Yes, it's also strange that if i try to read the emmc dumps are fine, and since after writing freeboot the initial configuration starts I think also there aren't problem in writing it...I really don't know what the problem could be except for a damaged emmc, I will try to convert it to a corona 16mb and will update you

Thank you Swizzy, I thought the same...but the customer doesn't want to spend too much so I think I will make him an offer to buy this damaged xbox and then I will try to convert it to a 16 mb. If you want you can close the post or you can wait this week and then i will post results

Hi guys i'm a new user from Italy, so i'm sorry for my english and I hope you can understand... I have a crazy corona v6 with sk hynix emmc...a customer brought me it telling that after a wrong update (360 already had rgh) it didn't boot more (but i think he has bought it as a damaged console), he doesn't have the original backup of the nand. At first I wrote Xell and tried to boot the 360 to grab the cpukey without success, then i discovered that even the glitchip was faulty so i replaced it with an Ace v2 and then xell booted. So I rebuilded a freeboot image with the extracted cpukey and then flashed it to the console. 360 booted fine into NXE, then I decided to apply offline avatar/kinect update and now problems came...at first 360 was extracting the update but then, after the reboot, only black screen. So i tried to flash again the freeboot but this time in Jrunner and Autogg emmc is detected as removable and there is no more mb dimensions, however i was able to write the image successfully. Then I start the 360 and initial configuration starts (language selection, etc...), but after the configuration only black screen, if I try to boot again, after 360 logo, another time black screen. If i flash the freboot I'm able to do initial configuration every time but then only black screen. Sometimes after flash Xell works, other times 360 didn't even boot if i press eject. I have also checked resistors near the emmc and on the bottom (near r1r1) but they are all ok...the only thing I can imagine is that emmc is corrupted. If someone have had similar problems or an idea would be great, this evening I will also post some pictures...