Jump to content
RealModScene

forgottonone

Members
  • Content Count

    8
  • Joined

  • Last visited

Everything posted by forgottonone

  1. Hello again, So here is 1 of the problems im still running into... Slim Trinity - RGH Coolrunner rev B. FSD3 /w Link DashLaunch 3.05 Dash 2.0.16202.0 Everytime I scan my paths for games, it works perfectly fine till it get to the EMULATORS then it locks up everytime. I first cleared the Data and reset FSD via Setup menu, then rescanned games first then added Emus and it locked up again on Emus. I removed FSD3 and re-installed it and scanned again, games and XBLA and INDIE Games all scanned no problems. but again, locked up on Emus. I have tried to add and scan via Web interface and got the same results. some times, it locks up right away some times after 1 min and sometimes after 10mins. its very random. Any suggestions. Thank you *** also related to scanning, why do Indie Games go to HomeBrew folder, I guess its not a big deal, I know how to add more tabs to the menu so I can make a Indie game one and manual move the stuff to it..
  2. Tried that but didnt work. However I did figure it out, it was FakeLive I had to change it to FALSE.. now the game works. But I think some of the XBL Games needed it on, I know at least 2 games didnt work without it, oh well I dont mind having to change it back and forth. But now I have to post a new thread for a separate problem. .. Thanks for the Help and pointing me in the right direction. been stressing too long on that one
  3. ; launch.xex V3.0 config file ; parsed by simpleIni http://code.jellycan.com/simpleini/ ; currently supported devices and paths: ; internal hard disk Hdd: ; usb memory stick Usb: ; memory unit Mu: ; USB memory unit UsbMu: ; big block NAND mu FlashMu: ; internal slim 4G mu IntMu: ; internal corona 4g mu MmcMu: ; CD/DVD Dvd: (not recommended to use this one) ; buttons can point to any xex, or any CON with default.xex in it on any of the above devices ; note that Right Bumper is ALWAYS default to return NXE ; if you want to assign an additional one, use the path Sfc:dash.xex ie: ; BUT_A = Sfc:dash.xex ; all comments and fields in this file are optional, you can remove anything you don't need ; sorry for any double negatives ; njoy, cOz ; example entry ; Default = Hdd:FreeStyledefault.xex [Paths] BUT_A = BUT_B = BUT_X = Sfc:dash.xex BUT_Y = IntMu:Freestyledefault.xex Start = Back = LBump = RThumb = LThumb = ; Default is what loads when you hold no buttons ; leave this blank if you want NXE as default Default = IntMu:FreeStyledefault.xex ; at boot time, default can be overridden based on how the console is turned on ; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default ; note that the Guide item is ALWAYS overridden by option: remotenxe = true Guide = ; if you power on with the button on the front of the console (or the power button on a remote if remotenxe is not set to true) ; this item will be used instead of default Power = ; if set, going to system settins from HUD will run this app, override with Right Bumper Configapp = ; if set, this will be run as a title before any other option occurs, does not get circumvented by held buttons or default ; guide/power opts are processed after this; intended for a short video player to allow replacing bootanim Fakeanim = Hdd:fakeanimfakeanim.xex ; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped ; as text to a file. Same path restraints as the quick launch buttons. ; if exchandler is set to false, this option does nothing. ; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device ; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only ; checked on boot, so the device must be present at power on and at crash time for this to be effective ; ie: dumpfile = Usb:crashlog.txt Dumpfile = ; example plugin entry ; plugin1 = Usb:pluginaplugin.xex [Plugins] plugin1 = IntMu:Pluginsftpdll.xex plugin2 = IntMu:Pluginsswap.xex plugin3 = plugin4 = plugin5 = ; these options are never used directly by dash launch but serve to give the configuration program ; a place to keep these values [Externals] ; if true, the configuration application will start a FTP server (user/pass: xbox) ; if not present default is FALSE ftpserv = true ; if ftpserv is true, this is the port that will be used by the FTP server ; if not present default is 21 ftpport = 21 ; if true, the configuration application will start in launch mode instead of options mode ; if not present default is FALSE calaunch = false ; if true, temps in installer and in guide (shuttemps option) will be shown in farenheit instead of celcius ; if not present default is FALSE farenheit = false [settings] ; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you ; note you must release Y button then press desired QuickLaunchButtons after or use default item ; if not present default is TRUE nxemini = true ; if true ping limit will be removed for system link play (thanks FBDev!) ; if not present default is FALSE pingpatch = true ; if true (most) xbla will no longer need yaris patching (thanks mojobojo!) ; if not present default is FALSE contpatch = true ; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown ; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash ; if not present default is FALSE fatalfreeze = true ; when fatalfreeze is set to false, setting this to true will cause the box to reboot, setting it to false will instead have the box shut down ; note that this option does NOTHING when fatalfreeze is set to true ; if not present default is FALSE fatalreboot = false ; setting this to true will cause the box to reboot (soft reboot) the way it was intended to ; on jtag ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings ; if not present default is TRUE safereboot = true ; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed ; if not present this is set to FALSE regionspoof = true ; when regionspoof is true, you set your region here in hex preceding the value with 0x, for examle devkit would be region = 0x7fff ; if not present but regionspoof is set to true, this is set to 0x7FFF region = 0x7fff ; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE ; if not present this is set to FALSE dvdexitdash = true ; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu ; if not present this is set to FALSE xblaexitdash = true ; when set to true, using miniblades system setting options will not exit to NXE ; if not present this is set to FALSE nosysexit = false ; when set to true, miniblades will not appear... ever (requested as child saftey measure) ; note that using this option overrides everything in dash launch that relies on miniblade exits to function ; if not present this is set to FALSE nohud = false ; when set to false, xbox will be capable of finding system updaters ; if not present this is set to TRUE noupdater = false ; when set to true, dash launch will put all debug strings out to uart ; if not present this is set to FALSE debugout = false ; when set to false, dash launch will not attempt to handle last chance unhandled exceptions ; if set to false, exceptions will also not be dumped to the dumpfile ; if not present this is set to TRUE exchandler = true ; if set to true, this will block the console from resolving LIVE related dns ; if not set this value will be TRUE liveblock = true ; if liveblock is set to true, this will block the console from resolving all MS related dns ; setting this to TRUE will also block apps like freestyle from accessing things like cover images ; *** note that if NO INI is present for launch.xex, this is set to TRUE ; if not set this value will be FALSE livestrong = false ; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item ; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set ; if not set this value will be FALSE remotenxe = false ; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root ; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down ; if not set this value will be FALSE hddalive = false ; in seconds, the interval between when USB devices will be polled for "alive.txt" file ; if not set and hddalive is set to TRUE this value will be 210 hddtimer = 210 ; attempts to disable popups related to signing in, like "live is blocked" and similar ; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S A LOGIN DIALOG MAY NOT BE PERFECT !! ; !! to sign into live profiles other than auto signing on boot you MUST accept the 'check live for updates' dialog BEFORE enabling this option !! ; if not set this value will be FALSE signnotice = true ; when you hold guide button to shut down xbox, normally the 'cancel' option is selected ; setting this to TRUE will cause the shutdown option to be auto selected instead ; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !! ; if not set this value will be FALSE autoshut = false ; when you hold guide button to shut down xbox, normally a dialog comes up ; setting this to TRUE will cause the console to shutdown instead of show a dialog ; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !! ; if not set this value will be FALSE autooff = false ; 14699+ has native http functions, but you are forced to be logged into use them ; this patch removes that restriction, set to false to disable it if you have any problems ; if not set this value will be TRUE xhttp = true ; when tempbcast is set to TRUE the raw temp data from smc will be broadcast over UDP at temptime second ; intervals on port tempport ; if not set this value will be FALSE tempbcast = false ; if not set this value will be 10 temptime = 10 ; if not set this value will be 7030 tempport = 7030 ; when set to TRUE all titles will have the insecure socket priveledge ; if not set this value will be FALSE sockpatch = false ; when set to TRUE dash launch will not erase launchdata before launching a quick launch item ; if not set this value will be FALSE passlaunch = false ; when set to TRUE various functions will be spoofed to make firmware think it's connected to LIVE ; this does not compensate for the fact that it cannot contact LIVE servers ; setting this to TRUE forces liveblock to TRUE ; if not set this value will be FALSE fakelive = true ; when set to TRUE network/cloud storage options should not show up in disk dialogs ; if not set this value will be TRUE nonetstore = true ; when set to TRUE a snapshot of the console temperature data will be displayed in the console shutdown dialog (displayed when guide button is held) ; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !! ; enabling this option disables autooff ; if not set this value will be FALSE shuttemps = false ; when true, any devkit profiles on the console will not appear as corrupt and can be used ; any changes such as saving games or getting achievements will resign the profile with the current/retail keyvault ; this seems not to affect glitch/jtag dev crossflash, but could affect these profiles on true devkits ; if not set this value will be FALSE devprof = false ; when true, system link data will be encrypted for communication with devkits ; if not set this value will be FALSE devlink = true ; when true dash launch will perform automatic disk swapping ; WARNING!! do not enable if you use FSD or swap.xex for this !! ; if not set this value will be FALSE autoswap = false ; when true, disables kinect health pseudo video at game launch ; if not set this value will be TRUE nohealth = true ; when true, disables dash locale setup screens when settings already exist ; if not set this value will be TRUE nooobe = true ; shen true dash launch will automatically enable fakelive functionality only during official dash and indie play sessions ; if not set this value will be FALSE autofake = false
  4. Hello I been having a problem with SF4 on FSD3 crashing. ~ Slim Trinity /w CR reb B - RGH ~ ~ FSD3 ~ DashLaunch 3.05 ~ Kernal 16202 Every time I load SF4 it loads up and plays the intro but as soon as you press "start" to begin it crashes " Fatal Crash Intercepted ". Here is what I have done so far in troubleshooting. FS3 fresh install. - Inserted SF4 (Original Disc) and launched and crashed at Start Screen in the game. - Inserted Super SF4 (Original Disc) and launched and crashed at Start Screen in the game. - Inserted Super SF4 Arcade (Original Disc) and launched and crashed at Start Screen in the game. ** I also tried backup copies and got same results ** - I have tried Installing the game from each of these Original Discs and did TU updates the game still crashed at the same spot. -- I have tried from Official Dash with same results. -- Removed my HDD and tried again from all 3 Original Discs .. same results -- I took the disc to my brothers house (unmodded system, and the discs play perfectly fine) -- I cleared cache, removed DLCs, Deleted Content folders and removed anything to do with the game. tried from beging again and still get the same error. **** All other games I have both Original Disc and HDD installed work with out crashing. Please help me resolve this.. I have been working on this for a month or 2
  5. Ok 2 problems I ran into. Everything is setup and ports all passed, and JQE360 auth passed problems : 1) I loaded a game, went into LiNK, and could see 4 rooms with 14 users in one, so I joined it. as others joined a msg appeared to inform me of them joining also. When I went into " System Link " in the game, and then to join game there was no one where. I read about making sure you use the same TU as others. so I tried both available TU for that game. same effect 2) 88 relates to last part of (#1) ... if your running a game off a disc, you can not update the TUs so how are you going to play on LiNK, I don't have the space to keep installing my games to my HDD. im hoping there will be a workaround for problem number 2... I know know, why have RGH if your going to run originals, I got RGH, for other reasons, like XBL and downloadable content, and Kai (this box got banned long time ago) Thanks in advanced for the help
×
×
  • Create New...