Jump to content
RealModScene

Anonymous

Members
 View Profile  See their activity

  • Content Count

    515

  • Joined

  • Last visited

  • Days Won

    13

Posts posted by Anonymous

  1. Posted

    Can someone please give me an estimate on how much bandwidth would LiNK use per hour? and minimum bandwidth speed per second is required? I am new to this LiNK thing and of course would like to experience it... Cause I am on metered connection and don't wanna risk burning high amount of data on it...

    Although I know about xbox live's usage and requirement... But no one and no site has shared any info about LiNK or at least I couldn't find it, I thought it might be different because LiNK uses system link to get online...

    Thanks in advance for your help and hope someone shows up with help...

    Minimum 1Mbps is required for gud connection on link

    Unfortunately I have 512kbps connection although I am the first rank on free for all in some matches[emoji6]

    If I host the game means defiantly I will be get first rank lol[emoji12] [emoji12]

  2. Posted

    Maybe your usp flash drive didn't inserted properly,

    Maybe Your fsd didn't copy properly

    Note: delete your old launch.ini file

    Open your dash launch and set default path for your default.xex and press rb and then save it to your hdd nw you hav got new launch file

    Don't add any unwanted plugins

  4. Posted

    Hi guys this is anonymous today I am going to show you how to run Linux operating system on your rgh/jtag consoles

    I hope this tutorial will be useful for you

    First you need download this two rar files

    First one is ubuntu Linux rar file

    Second one is xell launch rar file

    http://file.libxenon.org/free60/linux/distro/ubuntu-10.10-xenon-beta5.zip

    http://digiex.net/downloads/download-center-2-0/xbox-360-content/libxenon-homebrew-jtag-reset-glitch-content/9158-xell-launch-xell-reloaded-hdmi-support-quickboot-shortcut-download.html

    Then extract this two rar files and copy to your usp flash drive

    Afterthat put your usp flash drive to your console and turn on your console

    Next you need to start xex menu and open your usp flash drive then start default.xex file

    Nw you can see xell will be loaded

    After 1 min you can get Linux desktop screen

    Cheerzzzz[emoji2] [emoji2] [emoji106] [emoji106]

    Note: after extract ubuntu rar file as you can get iso file then you need open iso File via win rar then copy that Linux files to your usp flash drive

    • Like 1

  5. Posted

    Looked at another game, go into the room, but do not see the server in the game.

    As searched the internet, some people say that mobile internet may not play.

    And I have a mobile internet, it may affect?

    System link feasibility not working via Mobile internet bcz you can't set port num
    • Like 1

  7. Posted

    It's probably that you don't have the SPI points attached...

    No my first attempt is I connected all spi points(motherboard board to squirt chip) andthen try to read nand via fcc cable

    SQUIRT_360_SPI_SLIM_DIAGRAM.jpg

     

     

    My second attempt is disconnect all spi point between squirt bga to motherboard anthen connected motherboard to squirt programmer

     

    Untitled.png

    But these two methods failure so I am asking is this problem into my console firmware chip or into rgh chip

  9. Posted

    I have some unexpected issue with my rgh console,, 2 days back I was playing fifa14 that time my console hanged again I did restart my console but my console didn't boot I checked all wire connection for rgh chip everything connected perfectly I can turn on my console, rgh chip led light blinking but no response, xell screen also didn't work so I decided to do hardware flash for my console

    I connected squirt programmer to rgh chip via fcc cable but I can't read my nand then I connected directly to motherboard same problem,

    My squirt programmer connected to my pc perfectly I mean device driver installed successfully I can Change svf file (SQUIRT_RGH_trinity_bga_alwayson_120522_1450.svf) via fcc cable but I can't

    read my nand and I can't write xell ,,, is this problem into firmware chip ???

    Or my rgh chip???

    Autogg status : no backend available

    Note : my squirt programmer to squirt bga 1.2 chip connection perfectly bcoz I can Change svf file

    • Like 2

  12. Posted

    3.14 dash launch:

    http://www.homebrew-connection.org/files/xbox/system_apps/DashLaunch/dl_dash_launch_v3.14.zip

    xebuild2.095

    XeBuild GUI 2.095 : 17150 kernel support added

    http://www.homebrew-connection.org/files/xbox/nand_builder/xeBuild_GUI/dl_xeBuild_GUI_2.095.rar

    17150 Avatar file:

    http://gxarena.com/download.php/Firmwares/Xbox360/17150.zip

    update tutorial:

    http://forum.homebrew-connection.org/index.php?topic=144.0

    • Like 2

  18. Posted

    Features :

    • One HDMI Male connector
    • One VGA Female Port
    • Audio Output via stereo male cable 3.5 mm (length- Approx 1 meter )
    • Support video input : HDMI 1.3a
    • Support output : Support up to UXGA and 1080I(50/60Hz),the same format as input
    • HDCP 1.2 protocol compliant
    • Installs in seconds
    • No power supply required
    • No settings to do, even a child can use it.

    Specifications:

    HDMI resolution ………………………….............................................................. HDMI 1.3a

    Input Video signal ………….…………………………..…………………….… 0.5~1.5Volts p-p

    Input DDC signal ……………………………………………………………….. 5Volts p-p (TTL)

    VGA output………………………………….Support up to UXGA and 1080I(60Hz)

    Max transmission bandwidth…….………………….……………………………………5.1Gbps

    Operating Temperature range……..…………….………………………………… (-15 to +55°C)

    Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)

    my console resolution is 720p and 60hz ,,,i adjust my converter wire ,xell screen has been blingig on my moniter, i think it should be hardware fault

×
×
  • Create New...