TudorBlue

Thanks guys. So its my crappy discs. First coasters ive had in a long time. Will order some verbs now.

Having trouble getting to grips with Burner Max payload. Tried to burn off GTA V twice but both atttempts ended with two coasters. I do have an iHas 124 B and it came up as enabled in Burner Max. I set my imgburn layer break at 2133520. Then it burn process started ok but after about halfway through, it failed. Here is the imgburn log. Any help with this will be very much appreciated. Thanks in advance guys.

I 15:10:30 Operation Started!I 15:10:30 Source File: C:UsersColin TudorDesktopGrand_Theft_Auto_V_XBOX360-COMPLEX-NZBGrabit.sxcomplex-gta5.disc2complex-gta5.disc2.dvdI 15:10:30 Source File Sectors: 4,267,015 (MODE1/2048)I 15:10:30 Source File Size: 8,738,846,720 bytesI 15:10:30 Source File Volume Identifier: DVD_ROMI 15:10:30 Source File Volume Set Identifier: b75b0000MS UDFBridgeI 15:10:30 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 15:10:30 Source File Implementation Identifier: Microsoft CDIMAGE UDFI 15:10:30 Source File File System(s): ISO9660, UDF (1.50)I 15:10:30 Destination Device: [5:0:0] ATAPI iHAS124 B AL0S (E (ATA)I 15:10:30 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)I 15:10:30 Destination Media Supported Write Speeds: 4x, 6x, 8xI 15:10:30 Destination Media Sectors: 4,267,040I 15:10:30 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes)I 15:10:30 Write Mode: DVDI 15:10:30 Write Type: DAOI 15:10:30 Write Speed: 2.4xI 15:10:30 DVD+R DL Reserve Track: NoI 15:10:30 Link Size: AutoI 15:10:30 Lock Volume: YesI 15:10:30 Test Mode: NoI 15:10:30 OPC: NoI 15:10:30 BURN-Proof: EnabledW 15:10:30 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)W 15:10:30 The drive only supports writing these discs at 4x, 6x, 8x.I 15:10:30 Book Type Setting: DVD-ROMI 15:10:30 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: YesI 15:10:30 CD/DVD Life Record Count: 346 - CD/DVD Record Count: 9I 15:10:30 User Specified L0 Data Zone Capacity: 2,133,520I 15:11:50 Set L0 Data Zone Capacity Succeeded!I 15:11:50 L0 Data Zone Capacity - Effective: 2,133,520I 15:11:51 Filling Buffer... (80 MiB)I 15:11:52 Writing LeadIn...I 15:11:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)I 15:11:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)I 15:11:54 Writing Layer 0... (LBA: 0 - 2133519)W 15:25:24 Failed to Write Sectors 2130336 - 2130367 - Reason: Write ErrorW 15:25:24 Retrying (1 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (2 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (3 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (4 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (5 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (6 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (7 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (8 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (9 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (10 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (11 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (12 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (13 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (14 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (15 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (16 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (17 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (18 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (19 of 20)...W 15:25:24 Retry Failed - Reason: Invalid Address For WriteW 15:25:24 Retrying (20 of 20)...W 15:25:25 Retry Failed - Reason: Invalid Address For WriteW 15:25:42 Retrying (21)...W 15:25:42 Retry Failed - Reason: Invalid Address For WriteE 15:25:43 Failed to Write Sectors 2130336 - 2130367 - Reason: Write ErrorE 15:25:43 Next Writable Address: 2129757I 15:25:43 Synchronising Cache...I 15:25:48 Closing Track...I 15:25:52 Finalising Disc...

Dont a little digging around and it appears to be the version of the game thats at fault. Im going to make a GoD and see if thats ok, failing that, its a case of buying the full game when its released OR waiting foor another group to release another version. Bugger but such is life Im afraid

Games On Demand is a native xbox format and and it also results in less files to transfer over (less chances of file corruption)

Reading up on it now. Thanks JpSent from my GT-I9100 using Tapatalk 2

GoD it

Whats the difference between an extracted game and a game on demand??? Bit clueless hereSent from my GT-I9100 using Tapatalk 2

Having a strange problem with FlashFXP and Resident Evil Revelations. Im trying to ftp the game over to my dual nand but for some reason, it keeps failing to transfer some of the files. Anyone got any suggestions? Doing my head in, Ive had 3 attempts so far. FlashFXP is usually reliable. Any other FTP clients I could try? Thanks in advance guys, any help with this will be very much appreciated 

 

Why not just use autogg? It makes updating as easy as it gets. One click.

I'd like to learn how to use Jrunner first jb, but my head is getting a little twatted with all the info on the pdf which comes with jrunner. I suppose Im worried about f&*king my xbox up

The J-Runner PDF explains everything.

 

J-Runner supports the Xecuter DemoN 100% and has no issues with reading or writing .

Thanks BL4K3Y, Ive downloaded jrunner and will read the pdf file. Ive had a quick look at it and it seems daunting lol. There,s a lot to take in. 

I can do that! But what about reading the nand? I.mean, I updated my old falcon rgh using this tutorial and it was a breeze and very straight forward. Ive never used jrunner but I have read nothing but good comments about it. Is there an easy to follow tutorial knocking around anywhere? If Ive got a set of instructions in front of.me, I'll be less likely to screw it up. Thanks BL4k3Y you are a star

I can do that! But what about reading the nand? I.mean, I updated my old falcon rgh using this tutorial and it was a breeze and very straight forward. Ive never used jrunner but I have read nothing but good comments about it. Is there an easy to follow tutorial knocking around anywhere? If Ive got a set of instructions in front of.me, I'll be less likely to screw it up. Thanks BL4k3Y you are a star

Im having trouble, well when I say trouble, Im getting an error message when I try and use Nand Flasher at the start of the process. As soo as I select read nand, I get this error message:

Error: No Nand found or supported Nand type

I definately need a  gui I can use on my pc, Im lost with this. Would the older version work with  16203? 

Reinstalled one of the games that I was having the trouble with and it was ok, no strange symbols. I'll just do the same with the other games that has the same issue. Still a strange one though.Sent from my GT-I9100

Ive not see this before, cant even describe the problem but if you take a look at the photo below you will see what I mean. Each file has some strange looking symbols and text rather than wording. Ive got the same issue with Tomb raider and one or two other games but not all. How can I fix this problem. Thanks in advance guys any help with this will be very much appreciated

 

I remembered it. Its mp360gui. Thanks for the replies guys. Much appreciatedSent from my GT-I9100

Used a program to check what version of a game I had, a while ago. I cannot for the life of me remember what it was called. You extracted the default.xex and input it into this program and it would give you the version and if there were any title updates for it. I will probably kick myself when one of you guys tell me what it is lol. Ive not used the program for a good while. Thanks in advance guys

rename folder to $$ystemUpdateNever thought of that JP, will try it now. thanks mate and sorry for posting in the wrong forum. Right thats worked but when it weent to update, I fgot this error message.. Cant process the update. If problem persists go to microsoft.com status code3F4F-3F4B-1600-2446-C810-1004Ive had this message before and last time i had to update the rgh and dashboard. Its on the very same machine so surely it should be ok. Ive only swapped the hdd over. Help

The console is on dashboard 2.0.16197.0 and the rgh kernal is 2.0.16197.0 helpSent from my GT-I9100

rename folder to $$ystemUpdate

Never thought of that JP, will try it now. thanks mate and sorry for posting in the wrong forum. 

 

Right thats worked but when it weent to update, I fgot this error message.. 

 

Cant process the update. If problem persists go to microsoft.com

 

status code

3F4F-3F4B-1600-2446-C810-1004

Ive had this message before and last time i had to update the rgh and dashboard. Its on the very same machine so surely it should be ok. Ive only swapped the hdd over. Help

I did this as well. Did the system update and the avatar update, and then recently I also upgraded to a larger hard drive and lost the avatar update. However, I re-downloaded the avatar update file and repeated the process i used prior to the hard drive update and didn't have any issues. The only thing I can recommend (that is if you haven't figured it out by now) is just try and repeat whatever you did prior to your hdd upgrade verbatim. I can assume you have tried that, but if it worked before it should work again. Maybe even just start completely over, reformat the drive, redownload the file.... the more things you try the more you can throw out as being the problem.

Ive reformatted the hdd Im using now but it Im still getting the same issue, Ive tried 2 different flash drives and still no joy.  Ive done everything exactly like I did when I first installed the update on the other hdd. I   cant use that hdd because Im now using that hdd in a slim. Help!!!

avatar updates goto a folder called sysext... if you took out the HDD you took out the update. You need to run the avatar update again

Im trying to Dave. Its not happening mate. Ive put the system update on a usb drive but nothing happens when I insert the flash drive. Sent from my GT-I9100

I updated a RGH console a little while ago, with the update that allowed me edit the avatars. Fine, I could use avatars and edit them. I then replaced the hard drive on the xbox I updated, now I cant edit the avatars. When I go to edit avatars nothing happens. Ive put the update on a flash drive but I dont get the update prompt popping up! Can anyone help me with this and offer me some advice? Any help with this will be very much appreciated.Sent from my GT-I9100

did you try going into the settings area and doing a manual scan?

Yes, it didnt start scanning. Im going to reinstall fsd 3 and see if that fixes itSent from my GT-I9100

Ive added some new games to my hdd so decided to clear my data in my FSD. I expected all the covers to start downloading automatically but they didnt. I made sure all the conect setting were correct, allow downloading covers etc,  I even re-entered my JQE360 username and passord twice. The only way I could download the covers was to do each one in turn in my game library by pressing "Y" then refresh artwork. All done now but I'l like to know why the covers would automatically download. Thanks in advance guys

as long as your dual nand is turned off your safe to go on live. If you use it to apply changes to your avatar (clothes), that you didn't pay for on your live account, you may be flagged as to how your avatar got those items.

I was thinking about modding my glitched nand avatar! Ive got a load of avatar items that Im thinking of using. So if I mod my glitched nand profile avatar, its safe as long as 8 dont connect to xbl???Sent from my GT-I9100 using Tapatalk 2

Ive got a Dual Nand and use 2 hd`s. One has my FSD3 installed and the other I use for when Im on xbl. I just swap them over when I switch nands. Ive got a different profile id on each hdd. Can I use my xbl profile on my dual nand safely?? I want to be able to use avatar stuff on my dual nand but will have to do some reading up and find an easy to follow tutorial. Sent from my GT-I9100 using Tapatalk 2