dstruan

Update, i was really able to find the original NAND dump on my Harddisk load it and run the build process with the original dump ... Now everything is working well and the box starts well with the flashed NAND. Thanks a lot But maybe someone can give me hint in case i hadn't found the original NAND how to restore the NAND dump from a patched NAND ?? Thanks 😉

Hi, Sorry, i think i ask for an issue and how to solve which is already answered several time ... But did research since 5 hours without finding the proper answer. So, I tried to RGH3 Mod my Xbox 360 with a Corona Board, and i think i trapped in every trap which is available. The box was virgin and i tried to follow the youtube guide from Mario ... My Xbox 360 is a Corona V3-V6 Board with 16MB, i really couldn't find a proper definition for the correct Corona Version ... But the board has no POST and all the Resistors R2C10, R2C6, R2C7 where missing. I build in a CPU Postfix Adapter V1, did the cabling (Post <-> SMC_Post and PLL_BYPASS <-10K resistor-> SMC_PLL) and bridged the Resistors connectors on R2C10, R2C6, R2C7. First thing i checked is the Post -> Ground resistance ... it was 100k for every CPU Postfix Adapter i tried on PIN1 (no resistance on 4 and 6) ... resistance was not 40k like in some videos, but anyway i give it a try. I was successfully able to read the NAND with JRunner and my PicoFlasher, to create XeLL and to write XeLL ... but than the trouble starts ... When i try to boot the box with the eject button ... nothing happens ... After some reseach i figured out that that the PLL_BYPASS <-> SMC_PLL not requires a resistor on Corona Boards (not sure if it's true because i saw different posts and pictures as well) but i gave it a try, and the box was starting with XeLL. But her my mistake ... cause of the trouble i loaded the NAND several times and i guess i lost the very original one and only have the version with XeLL inside. Okay XeLL gave me the key and i try to create XeBuild. But here comes my issues ... XeBuild reports lots of "bad LBA blocks" and closes with ... fsroot found okay ... could not read kv.bin .... Error critical bootloader files missing, cannot proceed ... unable to complete NAND ... I found some information that this error happen while XeBuild tries to build NAND from a already flashed XeLL. How can i proceed ?? I tried to load a older NANDdump but it looks that even the other Dump contains a XeLL already ... Hmm ... Sorry for my stupidness ... Cheers