Jump to content
RealModScene

Leaderboard


Popular Content

Showing content with the highest reputation on 02/02/22 in all areas

  1. 1 point
    i made the steps i wrote to you . there was no problem (look at power mode and power vcs control data) : @Octal450 : the info about how to reset parental control its very usefull ;D
  2. 1 point
    Very well, thank you for the updates. Yes, Create XeBuild will NOT do anything, it will keep it. Very great to hear the New Donor Nand Creator worked properly. Greetings! @hunters-fox You are need to follow the tutorial, then he will show, I promise. If is not showing, you are doing something wrong! Kind Regards, Josh
  3. 1 point
    open that updflash with octals jrunner (its easier than flash tool 0.97) . you just need to use /nand/smc config editor option and press the edit config button. change 8280 to 8080 and then press save config button. it will create another updflash.bin with that edited smc_config to flash it to the console . thats it . @Octal450 the nanddump 17150.bin file that i uploaded was a corrupt nand (with badblocks) . to fix it i had to extract files and i tested with shitf + mouse left click and with the new "create donor nand option" . both worked fine . i checked the "clean smc " box to make it work . ;D . if you use that nanddump 17150.bin file and you select "retail" + "clean smc" and then you use the "create xebuild image" option it will create a new updflash.bin with the same badblocks . • Bad Block ID @ 0xE6 [Offset: 0x3B4C00] • Bad Block ID @ 0xFE [Offset: 0x417C00] • Bad Block ID @ 0xE6 Found @ 0x3FF[Offset: 0x107BE00] • Bad Block ID @ 0xFE Found @ 0x3FE[Offset: 0x1077C00] i thought that jrunner remapp badblocks automatically but its better if you create a new clean nand.bin. greeetings from mexico ;D
×
×
  • Create New...