Defect Report
Xbox 360 model / Corona v2
You turn on the Xbox and the Xbox cooler instantly goes to 100% After starting Dash,
after a few seconds the cooler speed returns to normal,
but the temperature shown in CASE/MOBO is above 200Β°C π‘οΈ
- It is not a defect in the thermal paste
- It's not ksb defect
- No GPU defect
----------------------------
After a search I didn't find any information so I started looking for a way out of the problem. π₯
Solution to the problem
After an analysis on the board we found these 0r resistors that make the communication,
after a long time of use they lose their contacts thus losing communication
and presenting the Case / Mobo defect shows a temperature above 200ΒΊCπ‘οΈ
ππ
you must use a good flux and weld the 04 resistors again
If any of them are open or varied and you don't have a resistor to replace you can simply make a jumper
and check the contact between the points
After doing this, as you can see in the image below,
the Case/Mobo temperature will be shown again normally without claiming overheating . π
I hope that somehow this publication of mine has helped you to solve this problem in a simple way. π
Everything you need is above, but if for some reason you want to see my video solving the problem the link is here
https://youtu.be/NuWe_KmWAJo
π
Thanks for the encouragement :
- Josh Davison
- Leandro Br47
- StelioKontos
- Mattie
- FabricioMG
( they are amazing people that encourage me to do amazing things , thank you )
.