justmattymodding 0 Posted July 12, 2017 Couldn't add template as I'm not at that stage lol IM GOING CRAZY! So I have the following :Qsb- tx corona 4gb nand rw kit And JR PROGRAMMER V2 for xbox slim Coolrunner Rev C - UK Stock So 1)I have soldered the Nand rw kit into place. 2) I Then connected the ribbon to qsb to sd card reader and put the switch on to R/W 3) I tried connecting the sd drive into pc ( using win 10 with device signed off )this is what come up in device manager: What do I do next? ADD ME ON SKYPE <3 gedis@10vpn.info / matty modding PLEASE HELP ME IL SEND NUDES OF MY IMAGINARY GIRLFRIEND Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted July 12, 2017 Watch a youtube video of a 4GB corona install. This is where J-Runner comes in, as it will make allow you to read the nand. What ever you do, do not format the device in windows. Also, some sdcard readers dont work with the 4gb MMC in the xbox, so if it doesnt show up at all, try a different card reader. Quote Share this post Link to post Share on other sites
justmattymodding 0 Posted July 12, 2017 I have been but theres no good ones for my version . Quote Share this post Link to post Share on other sites
justmattymodding 0 Posted July 13, 2017 Also where can I find a diagram for checking the soldering with the Multimeter Quote Share this post Link to post Share on other sites
jrok96 0 Posted July 13, 2017 do you mean rev d? for coronas? or do you have the addon crystal? Quote Share this post Link to post Share on other sites
justmattymodding 0 Posted July 13, 2017 9 hours ago, jrok96 said: do you mean rev d? for coronas? or do you have the addon crystal? sorry I'm confused I have a rev c? Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted July 13, 2017 4GB corona installs are all the same, so it doesnt matter if it is v2, v4, or v6. any 4GB corona video will help. With a rev C, you will need an added crystal for STBY_CLK. Personally I would have gotten the ACE chip, and done S-RGH. Much faster boot times. As for the nand reading, your soldering looks good, so it is probably your card reader is incompatible with the chip. If the console still boots with the ribbon disconnected from the reader, then the soldering should be good. 2 Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted July 15, 2017 You must also have the console connected to the PSU (power supply), you should however NOT have the console on, just powered... Quote Share this post Link to post Share on other sites