Lmodir 4 Posted May 2, 2017 Hi evry one, hi swi I need some help to fix bad blocks in nand dump and Ecc errors Without having original dump Thnx alot Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted May 2, 2017 You can't "fix" them, you can however deal with them... Bad blocks/ecc errors are normal and quite common, you just have to remap the blocks where they occur to the end of the NAND Quote Share this post Link to post Share on other sites
Lmodir 4 Posted May 2, 2017 On 22/10/2014 at 1:46 PM, mr.fadel said: i'm Algerian Bro !! So ? How to remap them ? Thnx for reply Icant use jrunner ( it require something ) And i dont knwo how to use xnand healer Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted May 2, 2017 J-runner requires that you have the .NET run time libraries, and the C++ run time libraries. Should be included in the newer versions of windows, but if you are still running XP, then you will need to download and install them. If you could give me the error message, I can probably tell you exactly what you are missing. 2 Quote Share this post Link to post Share on other sites
Lmodir 4 Posted May 3, 2017 10 hours ago, gavin_darkglider said: J-runner requires that you have the .NET run time libraries, and the C++ run time libraries. Should be included in the newer versions of windows, but if you are still running XP, then you will need to download and install them. If you could give me the error message, I can probably tell you exactly what you are missing. Thnx my jrunner run normally but idont know how to use It require an internet connexion or Xbox connect to pc that i havent ??? Quote Share this post Link to post Share on other sites