Jump to content
RealModScene
gavin_darkglider

Updated J-runner

Recommended Posts

Here is an updated version of J-Runner It includes all dash files, and the avatar update for 17511, Latest Dashlaunch, and The latest Xebuild.  The download is a bit big, but that is because it comes with all of the dash files, and a few of the avatar updates. This is just the copy I put together for myself, so you might want to edit the settings, and make sure the folder layout is the way you want it.

This includes The official Xebuild, and The official dashlaunch 3.18.1.

Download Link: http://www.mediafire.com/file/kc1qj5mdt284igx/jrunner_17511.rar

Backup Link: https://mega.nz/#!qx5FRCqZ!LSGFiOFg06ZeuEt_8gyufhXLiG4uzN-AmRo_ehIXlqk

Update File(17526): http://www.mediafire.com/file/s4cnhmvptats9z4/j-runner_xebuild-1.19_DL3.19_update.rar

 

I am only releasing this, as the xebuild 1.18 has the files, minus the su2007000000000 files, so since I had the files, and swizzy didnt update xebuildgui for this update, I figured I would release it. :)

 

---UPDATE----

The update file above is to be extracted as is into the pre-existing xebuild folder in J-Runner. DO NOT erase the existing xebuild folder that is included with J-Runner, as there are a ton of files not included with the update file, but are included with J-Runner, in the xebuild folder, and without them, xebuild wont build images. Just extract the file into the j-runner\xebuild folder, and overwrite all files.  

  • Like 13

Share this post


Link to post
Share on other sites

Good to know. Will do. Uploading now. Will report back when done. Out of curiosity what did this bug do?

 

Apparently plugins where not loading for some people. 

Share this post


Link to post
Share on other sites

Op updated with new version that includes cOz's dashlaunch fix. Also, if you have problems with update via network in windows 10, go into the xebuild folder, open a command line there by holding ctrl+shift and right clicking, and type "xebuild update -f 17511", and it will work. I was not able to get xebuild to do the avatar update in windows 10 otherwise. It would update the nand though. Wierd.

  • Like 1

Share this post


Link to post
Share on other sites

Op updated with new version that includes cOz's dashlaunch fix. Also, if you have problems with update via network in windows 10, go into the xebuild folder, open a command line there by holding ctrl+shift and right clicking, and type "xebuild update -f 17511", and it will work. I was not able to get xebuild to do the avatar update in windows 10 otherwise. It would update the nand though. Wierd.

I've never had a problem updating the avatar data on windows 10, albeit, not with this latest dash update..

Will try it out i guess and write back

Edit: stupid question.. did you run as admin gavin? It does pop up a message for windows 8 saying must be ran as admin.. same goes for win10

Share this post


Link to post
Share on other sites

Yes, I ran as admin. Then monitored the network traffic of Xebuild, and got nothing. When I ran it in the command line it worked fine. Could be a firewall issue, but since I am lazy, and that worked, I didnt look into it too much.

Share this post


Link to post
Share on other sites

It appears there are too many people trying to download the file from my dropbox...... wait a while, and try again. If it doesnt resolve by soon, I will generate a new link. Honestly didnt expect to get that many people trying to download it. lol. I think I will have to upload to mega or something.

@Dr.Gonzo Is that the pack I put together? if it is, I will put the link in the main thread.

Share this post


Link to post
Share on other sites

Yeah gavin_darkglider, its your build from your start posting. You can use it as Backup Download Link in your first Posting.

Share this post


Link to post
Share on other sites

New link in op. Sorry for the delays, dropbox shutdown the link due to too much traffic. Sorry about the delay. ;)

Thx for uploading this to Mediafire i really like their service and for me i can download with good speed @ 1-3MB

I like J-Runner.... this update is awesome, team xecuter didnt replyed to my thread about broken J-Runner service, so its good that youve fixed it.

(xecuter site/support seems to be dead)

 

The last JRunner Version i have on my system is without Virus warning J-Runner v03 Beta (8) here: http://www.file-upload.net/download-12115042/JRunner.rar.html

Your Upload contains/cause a TROJAN warning https://www.virustotal.com/de/file/84d88cea98df88c2a9abb05bfdf30619424aed0e6608d4ff43a50cdb8b08a437/analysis/1479904211/

Maybe you can fix this to ?

Share this post


Link to post
Share on other sites

You cant fix it. Primarily It deeply connected with the signatures of the used online scan engines. The J Runner Rars are be pest-free.
 

Share this post


Link to post
Share on other sites

Thx for uploading this to Mediafire i really like their service and for me i can download with good speed @ 1-3MB

I like J-Runner.... this update is awesome, team xecuter didnt replyed to my thread about broken J-Runner service, so its good that youve fixed it.

(xecuter site/support seems to be dead)

 

The last JRunner Version i have on my system is without Virus warning J-Runner v03 Beta (8) here: http://www.file-upload.net/download-12115042/JRunner.rar.html

Your Upload contains/cause a TROJAN warning https://www.virustotal.com/de/file/84d88cea98df88c2a9abb05bfdf30619424aed0e6608d4ff43a50cdb8b08a437/analysis/1479904211/

Maybe you can fix this to ?

That "Trojan" as you call it is just the protection used to obfuscate the code (make it harder to reverse the software) probably this one: https://yck1509.github.io/ConfuserEx/ or one of it's earlier versions: https://confuser.codeplex.com/

Share this post


Link to post
Share on other sites

You cant fix it. Primarily It deeply connected with the signatures of the used online scan engines. The J Runner Rars are be pest-free.

 

 

That "Trojan" as you call it is just the protection used to obfuscate the code (make it harder to reverse the software) probably this one: https://yck1509.github.io/ConfuserEx/ or one of it's earlier versions: https://confuser.codeplex.com/

Hmm okay. But why cant i use my .exe Version ? It is a newer one than the fixed (3.7.2) but when i use it with the downloaded files it shows 

xebuild 1.16 DL: 3.16 and connection error, is the .exe from the fixed stuff patched ?

Share this post


Link to post
Share on other sites

Hmm okay. But why cant i use my .exe Version ? It is a newer one than the fixed (3.7.2) but when i use it with the downloaded files it shows

xebuild 1.16 DL: 3.16 and connection error, is the .exe from the fixed stuff patched ?

Doubt it, the text is hardcoded, not dynamic... so, it will show what that version says... maybe old one uses a different server that is still available, just not updated?

Sent from my SM-G903F

Share this post


Link to post
Share on other sites

Just use the pack I uploaded. I promise I didnt embed a virus in it, it is as swizzy said, so you cant reverse the software. Because virus's use this to help hide themselves from your system, if the virus scanner detects the obfuscation, it thinks it is a virus. If you sandbox the app, and watch the network traffic, you will realize it isnt actually a virus. ;)

  • Like 2

Share this post


Link to post
Share on other sites

Of course its not infected. Some programs like Iso2God, NXE2God show the same symptoms in connection with some online scanner. In the first instance it depends on the used online Scanner signatures, that check the network traffic for specific decoder mutations routines like in malicious software.

  • Like 2

Share this post


Link to post
Share on other sites

Just use the pack I uploaded. I promise I didnt embed a virus in it, it is as swizzy said, so you cant reverse the software. Because virus's use this to help hide themselves from your system, if the virus scanner detects the obfuscation, it thinks it is a virus. If you sandbox the app, and watch the network traffic, you will realize it isnt actually a virus. ;)

Im gonna have to say that the update function in jrunner has stopped working.. i used it all the time.. until just recently.. weird.. but yeah..
  • Like 2

Share this post


Link to post
Share on other sites

Here is an updated version of J-Runner It includes all dash files, and the avatar update for 17511, Latest Dashlaunch, and The latest Xebuild. The download is a bit big, but that is because it comes with all of the dash files, and a few of the avatar updates. This is just the copy I put together for myself, so you might want to edit the settings, and make sure the folder layout is the way you want it.

This includes The official Xebuild, and The official dashlaunch 3.18.1.

Download Link: http://www.mediafire.com/file/kc1qj5mdt284igx/jrunner_17511.rar

Backup Link: https://mega.nz/#!qx5FRCqZ!LSGFiOFg06ZeuEt_8gyufhXLiG4uzN-AmRo_ehIXlqk

I am only releasing this, as the xebuild 1.18 has the files, minus the su2007000000000 files, so since I had the files, and swizzy didnt update xebuildgui for this update, I figured I would release it. :)

Thanks sir!

Sent from my LGLS992 using Tapatalk

Share this post


Link to post
Share on other sites

Im gonna have to say that the update function in jrunner has stopped working.. i used it all the time.. until just recently.. weird.. but yeah..

If you are talking about for downloading dashboards, then yes, the servers are down, and have been for a while. I had issues with the xebuild update server option in j-runner, it would freeze on the avatar data in windows 10, but if you run xebuild from the command line, which is is the xebuild folder it worked just fine. Could just be a firewall issue on my end though.

Share this post


Link to post
Share on other sites

If you are talking about for downloading dashboards, then yes, the servers are down, and have been for a while. I had issues with the xebuild update server option in j-runner, it would freeze on the avatar data in windows 10, but if you run xebuild from the command line, which is is the xebuild folder it worked just fine. Could just be a firewall issue on my end though.

No.. i have used jrunner plenty on win10 to do the avatar data.. been a few weeks.. now it doesnt update the avatar at all.. so not just a "localized" thing haha

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...