unleashed7 0 Posted October 13, 2014 Firstly, sorry if I make mistakes, my english isn't perfect. I searched everywhere for a help, but I found only topics who failed at update or flashed a bad NAND, so I hope here I will get an answer. I had a 16547 dashboard and I wanted to update to 16767. I have a trinity xbox. The only thing what I've done before update, it's a copy of my NAND with Flash360, because of the xeBuild. I made the updflash.bin like before, but when I put in root of a FAT32 flash drive and started the xbox with eject, nothing happens, I mean the Xell stucks after writing my drive name, at "fat Mount uda0" or before that, with something "SATA..." and now I don't know what to do. I think before I tried to update, the Xell worked today, because after some rows, the "fat Mount uda0" it's changing with other row continuously, but I think that is the normal state if you don't want to do anything with Xell. But now I can't do nothing, I tried to "reupdate" the 16547 but it's the same with that too. My xbox is working, FSD and others, so I can play, but now I can't update if it will be needed for future games. Thanks in advice! Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted October 13, 2014 You have a hitachi drive or your liteon tray is open, it's a known issue in XeLL-Reloaded 0.993, which i believe i fixed later on... but... haven't released it as nobody properly verified it to be working ok after i did some changes to hopefully solve it... If you download Simple 360 NAND Flasher 1.4b it can get the CPUKey for you from dash instead... it's also much better then Flash360 Quote Share this post Link to post Share on other sites
wrathss 2 Posted October 13, 2014 open xbox case and remove dvd-rom cable.Again write nand file xell reloaded working Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted October 13, 2014 no need to flash the nand... just removing the dvd drive will solve the problem as the drive doesn't end up in a state of waiting for the console and the console doesn't wait for the dvd... which is what the problem is basically... Quote Share this post Link to post Share on other sites
unleashed7 0 Posted October 14, 2014 Thank you for your reply! I never opened my Xbox case, but I think now it will be necessary, but what sould I do first? Can you give a list in ordin what I need to do? 1. Remove the dvd cable 2. Start my console with tray open button and the update will work 3. Plug in the dvd cable or 1. Remove the dvd cable 2. Make a new update with xeBuild with a new NAND file (Simple 360 Nand Flasher) 3. Start my console with tray open button and the update will work 4. Plug in the dvd cable Anything else, what should I do? And thank you again for helping me. Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted October 14, 2014 The easy way is to just download Simple 360 NAND Flasher 1.4b from here: http://www.realmodscene.com/index.php?/topic/3962-simple-360-nand-flasher-14b/ run it and dump your nand, as long as you have dashlaunch installed it'll get your CPUKey aswell... Quote Share this post Link to post Share on other sites
unleashed7 0 Posted October 14, 2014 I'm sorry, probably just I don't get it, but now what? I've done what you said and yes, I've got the CPUKey too. Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted October 14, 2014 I'm sorry, probably just I don't get it, but now what? I've done what you said and yes, I've got the CPUKey too. Just follow the instructions from here: http://xebuildtut.xeupd.com/ you can skip the step for getting cpukey as you already have it... other then that, just follow the instructions =) Quote Share this post Link to post Share on other sites
unleashed7 0 Posted October 14, 2014 Oh, how I missed that part. The Xell still not working, so I have to update everytime with Simple360, but I'm glad that it working this way. I saw the option that the program can write the NAND, not just dump it, but I didn't had the courage to try it. I feel like a noob. Anyway, thank you very much for your time and support! Have a nice day! Quote Share this post Link to post Share on other sites
Gohakon 0 Posted October 15, 2014 Another solution consists to downgrade the Xell version in your nand . To do this, download Xell Reloaded version 0.991, copy xell-2f.bin and xell-gggggg.bin and paste them into working directory of Xebuild GUI directory. Build a new nand and flash your Xbox. Quote Share this post Link to post Share on other sites
unleashed7 0 Posted October 15, 2014 Thank you, I will try this! Quote Share this post Link to post Share on other sites
PauloKoast 28 Posted December 5, 2014 Another solution consists to downgrade the Xell version in your nand . To do this, download Xell Reloaded version 0.991, copy xell-2f.bin and xell-gggggg.bin and paste them into working directory of Xebuild GUI directory. Build a new nand and flash your Xbox. Didn't work for me, fucking Hitachi drive! I don't want to remove it because sometimes I watch some DVD movies. Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted December 5, 2014 Didn't work for me, fucking Hitachi drive! I don't want to remove it because sometimes I watch some DVD movies.Do you really need xell tho?Sent from my GT-I9300 using Tapatalk Quote Share this post Link to post Share on other sites
PauloKoast 28 Posted December 6, 2014 Do you really need xell tho? Sent from my GT-I9300 using Tapatalk Nope, but I wanted to play some games on Mupen64-360. Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted December 7, 2014 I think Mupen64-360 v0.993 have the same issue if it uses the DVD... not sure... if it doesn't use the DVD... you can launch it from the aurora filemanager Quote Share this post Link to post Share on other sites
PauloKoast 28 Posted December 10, 2014 I think Mupen64-360 v0.993 have the same issue if it uses the DVD... not sure... if it doesn't use the DVD... you can launch it from the aurora filemanager I tried running it through everything: USB, HDD, DVD, and none worked =( I don't know if you're the person who do this, but did you check the new dashboard update, Swizzy? I asked on Xbox Support what's new on it and they said it adds some stability stuff Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted December 10, 2014 I tried running it through everything: USB, HDD, DVD, and none worked =( I don't know if you're the person who do this, but did you check the new dashboard update, Swizzy? I asked on Xbox Support what's new on it and they said it adds some stability stuff I'm not the person that does look at it much, but i am in contact with one of them that do... and he didn't tell me about anything major new... kernel changed... hv didn't... all i can really say... and of course, there's no new bootloaders or anything like that... Did you have the mupen64 folder as described in the readme? if not; that's why it's not working... otherwise i need a little bit more information... 1 Quote Share this post Link to post Share on other sites
PauloKoast 28 Posted December 10, 2014 I'm not the person that does look at it much, but i am in contact with one of them that do... and he didn't tell me about anything major new... kernel changed... hv didn't... all i can really say... and of course, there's no new bootloaders or anything like that... Did you have the mupen64 folder as described in the readme? if not; that's why it's not working... otherwise i need a little bit more information... Yes, mupen64-360 folder and xenon.elf in the same folder, right? Mupen64-360 V0.96 works fine Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted December 10, 2014 So, 0.993 does use the DVD code... you'll have to run 0.992 or recompile it without DVD support Quote Share this post Link to post Share on other sites
PauloKoast 28 Posted December 10, 2014 I was trying to use the V0.992 version, and I got V0.993 working because it does not uses USB and DVD, and just shows my HDD But when I try to run a rom it returns to the Xell blue screen How can I recompile 0.993 version without the DVD code? EDIT: I'm following Free60's tutorial to install Xenon Toolchain, I'll check other tutorials too Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted December 11, 2014 I was trying to use the V0.992 version, and I got V0.993 working because it does not uses USB and DVD, and just shows my HDD But when I try to run a rom it returns to the Xell blue screen How can I recompile 0.993 version without the DVD code? You have to setup a Libxenon toolchain, then you need to edit the 0.993 code and comment out anything related to DVD and just compile it =) Quote Share this post Link to post Share on other sites
PauloKoast 28 Posted December 11, 2014 I can't even install the Cygwin stuff required, I think I'll give up lol Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted December 11, 2014 I can't even install the Cygwin stuff required, I think I'll give up lol I used Vbox by Oracle to install a virtual Linux machine I couldn't get Cygwin to work either Quote Share this post Link to post Share on other sites
PauloKoast 28 Posted December 11, 2014 I used Vbox by Oracle to install a virtual Linux machine I couldn't get Cygwin to work either I'm installing Debian on VirtualBox at the moment, hehe Quote Share this post Link to post Share on other sites
PauloKoast 28 Posted December 11, 2014 So... I have been trying to install the Toolchain but something happens when GCC is installing I followed the instructions here: http://free60.org/wiki/Xenon_Toolchain#Full_process_of_installation And I can't install this "libgmp4-dev" because it says it could not be found Here's what I'm getting at build.log: Quote Share this post Link to post Share on other sites