toniantono2592 0 Posted July 19, 2014 Hi!!!I am new at your site but i am impressed from your job.I would like to help me with my problem if you could.I try to update dash from 16203 to 16547 .I am using 360 nand flasher v1.2 and xebuild 2.093.When i open my nand xebuild shows me: error cant determine if its or small block nand .I continue with process but the result: there was one or more fatal errors during the build process.I saw another post with some solutions that you recommended (like check fcrt .bin check e.t.c.) but still nothing.I tried again to dump my nand but still the same result.My console is corona, (psu is 9.6v) but not with 4 gb hdd.Thank you for your time xeBuild_GUI2.txt this is the log file Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted July 19, 2014 First of all; You are using xeBuild GUI, not xeBuild... Check this link for specific instructions; http://xebuildtut.xeupd.com Quote Share this post Link to post Share on other sites
toniantono2592 0 Posted July 21, 2014 I saw the tutorial and it was very helpful.But my problem is not solved and the thing is that when i dump my nand the file is only 5.5mb.That should be 16mb.Am i right? Can i use the nand on the cd with cpu key from the man who rgh my console?Nand 1 or nand 2?Because there are 2 nands insine cd with cpu key.I suppose nand 1 was before rgh and nand 2 after rgh.What will happened if i use stock nand (instead of the nand after rgh) for update ? Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted July 21, 2014 I saw the tutorial and it was very helpful.But my problem is not solved and the thing is that when i dump my nand the file is only 5.5mb.That should be 16mb.Am i right? Can i use the nand on the cd with cpu key from the man who rgh my console?Nand 1 or nand 2?Because there are 2 nands insine cd with cpu key.I suppose nand 1 was before rgh and nand 2 after rgh.What will happened if i use stock nand (instead of the nand after rgh) for update ? If you only get a 5.5MB file something went wrong with the dumping, and your dump is therefor not complete... What tool did you use to dump your nand? do you have enough space for it? Yes, you can use those dumps also, but it's not 100% safe because you can't really verify that it's the correct files for your console, what happens if it's wrong? well... your console no longer works... Using Retail dump for the update is basically the same as using the current nand, the difference is that your settings will be reverted to whatever it was when the dump was made... I'd recommend using a bigger USB drive, and using Simple 360 NAND Flasher, also check that you are using FAT32 and not FAT... even tho it probably works with FAT also, it's better to use FAT32 1 Quote Share this post Link to post Share on other sites
toniantono2592 0 Posted July 22, 2014 I use simple 360 nand flasher v 1.2.My flash drive is 8gb fat 32.But my friend your idea was marvellous.There wasn't enough space to flash drive .My dump nand now is 16.5mb.I will import it to xeBuild Gui and i believe it will work.Thank you very much P.s. i will inform you for the update too Quote Share this post Link to post Share on other sites
toniantono2592 0 Posted July 22, 2014 ALL good with the update too thanks Quote Share this post Link to post Share on other sites
