JPizzle 0 Posted February 10, 2013 It's been 9 months in the making (no thanks to several motherboard/dashboard revisions during our development time), and now after an exhaustive test run, the CR3 Pro is ready for public consumption. This is aimed at users who demand the highest RGH performance possible and the ability to tune their settings to an extreme level. The CR3 Pro is not for beginners, modders looking for cheap and cheerful solutions or anyone who is happy with slow, unreliable glitching. The first release of CR3 Pro is designed for slims with FULL POST only (Trinity, Corona v1 & Corona v2). As Corona v3 and v4 had FULL POST removed there will have to be a different version of CR3 PRO for those models using FAKE POST. This is being tested right now and will be released soon. We have put together two packages. The CR3 Pro Kit which covers the basics (mainly for those who already own the QSB's and JR Programmer v2 etc) and the CR3 Pro Ultimate 19pc Kit which includes absolutely everything that you need to do a complete high performance install. Xecuter CR3 Pro v1.0S FULL POST Features: Brand new design – totally new RGH code Next Generation RGH Tool – The highest performing RGH device on the market Full POST Slim version supports Trinity, Corona v1 and Corona v2 Full POST monitoring and tuning via the New CR3 Pro RATER Feature – fine tune your boot times to PERFECTO! (Requires JR Programmer v2) Multiple pulse settings via DIP Switches Multiple Ceramic Cap options (7pc kit included 10pf, 22pf, 30pf, 47pf, 68pf, 82pf and 100pf) New Built In ROL Option (Show Debug LED On Front Panel Ring Of Light) Built-in Ribbon Cable Connector For DemoN (Includes CR_EN and XSVF Programming – no soldering or wires) Quality Assured – No Cheap Chinese Knocks-Offs Optimized timing for each motherboard version Easy programming via JTAG Power LED Reset Cycle Debug LED Easy Install (Includes All Wires) Works perfectly with J-R Programmer v2 & DemoN New v3 QSB Add-Ons Available (Included with the Ultimate Kit) JR Programmer v2 is required for CR3 Pro RATER & programming functions (Included with the Ultimate Kit) Trusted Team Xecuter Design & Warranty The CR3 Pro Kit Includes: Xecuter CR3 Pro v1.0S FULL POST Xecuter FULL POST SLIM QSB v2 7pc Ceramic Cap Kit (10pf, 22pf, 30pf, 47pf, 68pf, 82pf, 100pf) FFC POST_OUT Ribbon Cable – Trinity FFC POST_OUT Ribbon Cable – Corona CR3 Pro Install Wires (Optional if no QSB Used) MSRP $39.95 The CR3 Pro Ultimate Kit Includes: Xecuter CR3 Pro v1.0S FULL POST Xecuter JR Programmer v2 (*See Notes Below) Xecuter FULL POST SLIM QSB v2 Xecuter JR Programmer / NAND-X / CoolRunner QSB Kit v3 – Trinity (**See Notes Below) Xecuter JR Programmer / NAND-X / CoolRunner QSB Kit v3 – Corona (**See Notes Below) Xecuter XCLAMP Removal Tool 7pc Ceramic Cap Kit (10pf, 22pf, 30pf, 47pf, 68pf, 82pf, 100pf) FFC POST_OUT Ribbon Cable – Trinity FFC POST_OUT Ribbon Cable – Corona JR Programmer v2 to CR3 Pro POST Monitoring Cable JR Programmer v2 QSB Cable JR Programmer v2 JTAG Update Cable CR3 Pro Install Wires (Optional if no QSB Used) MSRP $69.95 *The new J-R Programmer v2 now includes full POST monitoring for the CR3 Pro RATER feature. Speed enhancements are also included that puts it within 30 seconds of the high speed NAND-X NEW 2 Version with Full POST Monitoring and CR3 Pro RATER Support. Also includes speed enhancements (2-3 minutes faster than JRP v1 !) The new TX J-R Programmer V2 has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app. A third of the size of the TX NAND-X and optimized to run faster than any other USB-SPI based tool (Example Speeds: Others average 16M read 7m 20s, JRP v2 average 16M read 3mins), this nifty tool can fully read/write NAND over SPI, program CoolRunners or any Xilinx based RGH device over USB and also able to program onboard sounds using the TX SONUS 360 ! Complete with a CR JTAG cable so you simply plug 'n program without any soldering using the latest J-Runner App (needs to be at least Build 283). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you don't use the QSB's you can simply cut off the connectors and do a normal wires only install. The J-R Programmer V2 is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LED's indicate Power and BootLoader mode. RED LED: Bootloader Mode (Switch to the left)GREEN LED: J-R Programmer Mode (Switch to the right)RED LED FLASHING: R/W Activity & POST Activity (Switch to the right) Features: Fast NAND Programming Fast XILINX CR JTAG Programming Compatible with all CoolRunners inc the new CR3 Pro Supports Full Post Monitoring Compatible with both Phat and Slim Onboard LED's indicate Power & Data Easy Install System Compatible with All NAND-X QSB's Includes Cable For QSB V3 Kit or Wires Install (QSB V3 Kits Sold Separately) Includes Cable For Xilinx CRJTAG Includes Cable for Xecuter Sonus 360 (Sonus 360 QSB Sold Separately – Trinity Kit or Corona Kit) Includes KIOSK option for Remote On Built-in Programmer For Future Firmware Upgrades Designed for the latest J-Runner App (Build 283+) Rock Solid Design – Tested by the J-Runner Team Supports New QSB V3 Kits (Solder Separately) Supports Sonus 360 Programming Affordable – We Provide You With More For Less ! High Quality & Trusted TX Design Available to buy separately only $29.95 **The new V3 QSB kits also allow Xell monitoring over SERIAL/UART using the latest version J-Runner software (NAND-X USB Update Cable Required – we designed the software so it could also use this cable without having to design a new one). The new V3 QSB's are also designed to be Plug n Play compatible with both J-R Programmer & NAND-X and offer the cleanest and most optimum RGH install possible. Here is a screenshot of the v3 QSB Xell Monitoring at work: Not only do you have multiple tuning settings available to you with the CR3 Pro but you are also able to monitor and tune the performance using the much talked about CR3 Pro RATER Feature. No longer do you scratch around in the dark looking for your best settings, we now completely eliminate the guess work. Just look at these glitch times on a Corona ! CR3 Pro Rater – can you make your 360 slim scream PERFECTO! ? Trinity Installation: Corona v1 Installation: Corona v2 Installation: Remember that there may be fake CR3 Pro & JR Programmer v2 out there – it goes without saying that they are cheap garbage and you should stay away. Every official Xecuter product has a serial code – you should claim ownership of the code at serial.xecuter.com Source: http://team-xecuter.com/xecuter-cr3-pro-v1-0s-full-post-on-sale-now/ Quote Share this post Link to post Share on other sites
